PLDVRCAM71 DVR DASH CAM Full HD 1080p Vehicle Dash Camera Video Recording System USER MANUAL
INTRODUCTION PLDVRCAM71 DVR Dash Cam is developed to find evidence in case of traffic accident. This camera can also be used in other occasions such as meetings, monitoring and forensics, location shooting and video evidence.
INSTALLATION NOTES This product should be tied together with the original rear-view mirror. To determine the lens in the windshield wiper is in range, ensure good vision, and also good in rainy environments. Don't touch the lens with your fingers, the finger’s grease may remain in the lens, resulting in camera or photograph to be unclear, please clean the lens regularly. Attention • Please use the original standard charger • Please do not dismantle the machine to avoid affecting the scope of warranty.
1. MIC Interface 2. Micro SD Memory Card Slot 3. Knob 4. USB Interface 5. GPS Interface (optional) 6. AV Interface 7. MIC Indicator 8. Power Indicator 9. REC Indicator 10. Screen 11. MIC Button 12. REC Button 13. OK Button 14. Menu Button 15. Power Button 16. Pedestal 17. Reset Button 18. Cable Slot Description of Button Functions 1. Button Function 1: Power ON/OFF In power-OFF state, press the button to power ON DASHCAM. The DASHCAM begins to work automatically.
3. Button FUNCTION 1: LOCKING During the video-recording process, press the button to save the video-recording data into a separate folder in the memory card. The files in the folder will not be overwritten cyclically. NOTE: In playback mode, a key-shaped icon in the miniature icon list indicates that the audio recording is locked. FUNCTION 2: PHOTOGRAPH In photograph mode, press the button to take photos.
5. Button FUNCTION 1: PAGE DOWN In the menu setting and playback modes, you can press the button to page down. FUNCTION 2: FAST FORWARD In playback state, press the button to enter the fast forward mode. FUNCTION 3: MODE SWITCHING In standby state, press the to enter the photograpy mode, and press the again to enter the playback mode. On the playback interface, you can page up/down and press the to select the desired file.
3. Inserting a memory card You have to insert a memory card before you can start recording. The recorder supports Micro SD cards with up to 32GB capacity. You are advised to use a Class 10 memory card with at least 8GB capacity. DO NOT insert or remove the memory card when operating the device. OPERATION GUIDE I. Installing the DASHCAM 1. Power off the automobile engine. 2. Insert the Memory card into the Memory card slot. NOTE: a.
6. Insert the charging interface of the in-vehicle charger into the USB interface the data recorder. 7. Adjust the angle of the data recorder, ensuring that the camera lens keeps level with the ground. 8. Start up the engine and check whether the DASHCAM is mounted properly. II. Function Description 1. Automatic Recording After you start up the automobile engine, the DASHCAM will automatically start and recording function will be enabled.
Press the button to take photos. To switch back to the video-recording mode, press the button and press and hold the button for five minutes. 4. Collision Sensing The DASHCAM is fitted with a built-in collision sensor (G-sensor). In case of severe vehicle collision, the DASHCAM locks the image data generated at the time of the accident, and displays a lock icon in the middle of the screen. [Prompt] The collision sensor (G-sensor) supports sensitivity adjustment.
[Prompt] When you use a PC to copy a video-recording file, it is recommended that you use a card reader to copy the video-recording file in the TF card to the PC. 7. Playback of Recording File In power-on state, press the button twice to enter the playback mode. Press the or button to find the desired type of file, and press the button to play back the file. 8. PC Camera Connect the data recorder to the USB interface of a PC by using a data cable.
