PRECAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
6. Specification General Specification Power Supply Requirement..................................................DC 12V Maximum Power Output...................4 x 80W(measured at DC 14.4 V) Dimensions(w x h x d)........................................178 x 50.5 x 162mm DVD Deck Specification Format.....................................DVD/VCD/JPEG/MP4/MP3/WMA/CD Video System....................NTSC/PAL/PAL-M/PAL-N/AUTO(optional) Audio System..............................................................
5. The Trouble Shooting 1. Before Operation 1.1 Glossary PBC (playback control) It is a kind of signal(menu) recorded in the disc with SVCD or VCD2.0 format used for the playback control. For the discs contained PBC, It can playback interactive software with the menu displayed on monitor screen. If the disc contain still images, it can playback high definition of still image. Please read the user ’s manual carefully before using t he DVD player.
1.3 Maintenance and Cleaning of Discs * The Region Code Q: Not begin to playback but to display REGION ERROR after inserting disc into disc compartment. Why ? A: Because the DVD player and disc has respective region code. If the region codes of them are not match with each other, the DVD player can not play the disc. Disc Maintenance 1. To keep the disc clean, handle the disc by its edge, do not touch the disc surface of the play side. 2. Do not stick paper or tape on the disc.
1.5 The Remote Control Description 3 27 35 EQ BAND 1 1. TILT BUTTON 2. MENU BUTTON PWR 14 P/N 4 3. POWER BUTTON 4.24.5 SPEAKER SETUP 2 29 MU MENU MODE 33 32 6 0K SEL 9 34 SETUP 5 7 31 24 28 10 1 2 -10 +10 5 6 CLK 9 SLOW_FWD ST 4 7 8 0/10 10+ APS INT RPT RDM AUDIO TITLE/PBC SUBTITLE 11 5. >>| BUTTON 16 17 19 23 20 PROG OSD LOUD 7. |<< BUTTON 8. v BUTTON 9. SEL BUTTON 15 A-B 6. > BUTTON 12 18 ZOOM 26 25 3 SEARCH LOC 21 22 4.
4.24.2 LANGUAGE SETUP 1.6 The Locations and Names of Controls on or in the unit OSD LANGUAGE This item is for selecting the language of the SYSTEM MENU and all operating prompt interface displayed during playback. AUDIO LANG This item is for selecting a audio language. SUBTITLE LANG This item is for selecting a subtitle language. MENU LANG This item is for selecting a disc menu language. 4.24.
1.7 Wires Connection Description For the DVD System Menu, there are 6 setup pages in all. They display as follows: The Description of the Input/Output Interface of the Rear Cabinet 4.24.1 SYSTEM SETUP Fixed ISO Female Connector Clip of the other wires The Description of the Other Wires Through the Clip Clip VIDEO OUT2 AUX IN-R AUX IN-L AUX IN-V CAMERA VIDEO OUT1 PARKING REVERSE RCA-R Radio Ant RCA-L SUBWOOFER USB SOCKET The Description of the Fixed ISO Female Connector CONNECTOR A 1. 2.
3. During IMAGE playback, press one of the >/: 90 deg cw; <: 90deg ccw; ^:UP<-->DOWN; v: LEFT<-->RIGHT During IMAGE playback, press the PROG button to change the mode of refresh picture. During IMAGE playback, press the STOP button to stop playing and return to the root menu. * * During IMAGE playback, the following buttons are not available: SLOW-FWD, SUBTITLE, TITLE, ANGLE, AUDIO, RDM, INT and A-B.
4.20 Program Playback 2. Common Operation 1. To turn on/off the unit In power off mode, short press the POWER button to turn on the unit. In power on mode, long press the POWER button on the front panel or short press the POWER button on the remote control to turn off the unit. It allows you to enter the order in which you want some chapters/tracks in DVD/VCD/MP3/WMA/CD to play. 1 During playback, press the PROG button to enter a program interface as follows: for DVD for VCD/MP3/WMA/CD 2.
ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF. Press one of the ^/v/>/< buttons to select the area you want to enlarge. 4.16 Change the Caption Language In the state of DVD playing, press the SUBTITLE button repeatedly to select the language of the caption or turn off the caption.(depend on the media used.) In the state of VCD/MP3/WMA/CD playing, the button is not available. 4.17 Change the Audio Language 1.
4.11 Playback in Scan Mode finishing a circle of scanning , it will resume broadcasting on the M1.(It can store 3x6 stations for FM and 2x6 stations for AM in all) 2) When briefly pressing the APS button, the radio will scan each preset station for 5 seconds in FM or AM band from M1. After finishing a circle of scanning, it will resume broadcasting on the M1. NOTE: In FM band, FM1,FM2,FM3 is checked one at a time. In AM band, AM1, AM2 is checked one at a time. 5.
During slow forward, press the PLAY button to resume normal playback. The function is only for video. 4.9 Display still frame step by step If the unit is currently playing video, press the TEL button consecutively to display still frame step by step. Press the PLAY button to resume normal playback. 4.10 Playback Repeatedly 4.10.1 ONE/ALL Repeat 1. 2. In the mode of DVD playback: Press the RPT button to select REP CHAPTER, REP TITLE, REP ALL or REP OFF.
4.2 Pause Playback In the state of DVD/VCD/CD/MP3/WMA playing, press the PAUSE button on IR remote control to pause the playback, press the PLAY button to resume normal playback. 4 .3 Stop Playback In the state of DVD/VCD/MP3/WMA/CD playing, press the STOP button once to pause the playback, then press the PLAY button to resume the normal playback; press the STOP button twice to full stop the playback, then press the PLAY button to start playback from the beginning of the first chapter/track. 2.
