User Manual
www.PyleUSA.com
9
WIRELESS BT STREAMING OPERATION
Pair and Connect
Before using a Wireless BT device for the rst time, it must be paired and
connected.
1. This head unit broadcasts the pairing signal constantly when no devices are
connected. User can complete the pairing steps from your Wireless BT device.
Refer to owner’s manual for your device for more details.
2. When the phone nds the car audio system, the “Pyle” name will be displayed.
Choose the “Pyle” from the device list to pair and connect with the car audio
system. Upon conrming, the BT logo will stop ashing.
Answer a Call
When the mobile phone is called, the incoming telephone number displays on
the LCD display. Press the button on front panel or the button on the
remote control to answer the incoming phones.
Redial Last Dialed Number
Press and hold the button on the front panel or button on the remote
control to redial the last dialed phone number.
Reject or End a Call
Press the button on the front panel or button on the remote control to
reject or end the call.
Switch Audio Between Car Audio and mobile Phone
During a call, press the VOL knob/button to switch the audio source from the car
audio system back to your mobile phone.
Adjust Call Volume
During a talk, use VOL knob or VOL+ /VOL- button to adjust the call
volume level.
Audio Streaming (A2DP)
This head unit supports A2DP (advanced audio distribution prole) wireless
streaming audio from a Wireless BT mobile device directly to your head unit.
The following functions can be used to control the music playback.
• Skip to Next music
Press the button to play the next music in the mobile phone.
• Skip to Previous music
Press the button to previous music in the mobile phone.
• PLAY/PAUSE
Press the button to pause or restore the music playback.