PLDMR27NBK Marine Stereo Receiver Power Amplifier AM/FM/MP3/USB/BT/AUX/DVD/CD Marine Stereo Receiver, Double DIN, 30 Preset Memory Stations, LCD Display with Remote Control
To ensure correct operation and avoid damage, please read this user manual carefully before using this product. INSTALLATION Installation Procedures 1. First complete the electrical connections and then check for correctness. 2. Disconnect the battery negative terminal of vehicle before beginning installation. Installation Opening This unit can be installed in any dashboard having an opening as shown below.
INSTALLATION Connect all wiring harness and slide the head unit into the mounting collar until it clicks into place. Wiring Connections 1. Speaker Connectors: Violet: Right Rear (+) Violet / Black:Right Rear (-) Gray: Right Front (+) Gray/Black: Right Front (-) White: Left Front (+) White/Black: Left Front (+) Green:Left Rear (+) Green/Black: Left Rear (-) 2.
OVERVIEW OF THE CONTROLS 1. (power)/Volume knob and SEL (select/menu) button 2. SRC (source) button 3. BAND (band) button, (answer call) button 4. AMS (automatic store/preset station scan, automatic music search) button 5. (pause/play), Preset station1 button 6. INT (intro), Preset station 2 button 7. RPT (repeat), Preset station 3 button 8. RDM (random), Preset station 4 button 9. -10 (previous 10 tracks), Preset station 5 button 10. +10 (next 10 tracks), Preset station 6 button 11.
GENERAL OPERATION Turn Unit on/off, Adjust the volume (VOL), Adjust Menu Options (SEL) • Press the power (VOL knob) button button to turn on the unit. • Press and hold the power (VOL knob) button to turn the unit off. • Rotate the VOL knob on the front panel or press th VOL+ /VOL- button on the remote control to increase or decrease the volume level.
Change the Source (MODE) Press the SRC button to switch between RADIO, DISC (with a DVD/VCD/CD/MP3 disc inserded), USB (with USB device inserted), BT and AUX-IN (auxiliary input) modes. Setting the Clock (CLOCK) 1. To display clock time, press the CLOCK button. 2. To set clock time, press and hold the CLOCK button and the hour digits will flash on the display. 3. Rotate the VOL knob to adjust the hour. 4. Press the CLOCK button again, the minute digits will flash on the display. 5.
To Store/Recall Preset Stations The radio can be stored 6 preset stations for each band (FM1, FM2, FM3, AM1 and AM2) for atotal of 30 preset stations. • To memorize a station: Press and hold the desired preset buttons (1-6) to save a radio station. • To recall a preset station: Briefly press the respective station button (1-6) to recall the corresponding preset station. DVD/CD/MP3/USB OPERATION Insert Disc, Eject Disc • With the label facing up, insert a standard size disc into the dsic slot.
Introduction Scan Press the INT button to play the first 10 seconds of all track. Press again to stop theintroduction scan, and play the current track. Repeating the track • During DVD playback, press the RPT button to toggle between RPT CHA (repeat chapter), RPT TIT (repeat title), RPT ALL (repeat all), RPT OFF. • During VCD playback, press the RPT button to toggle between RPT ONE (Continuously repeats current track), RPT ALL (repeats all tracks), RPT OFF.
WIRELESS BT STREAMING OPERATION Pair and Connect Before using a Wireless BT device for the first time, it must be paired and connected. 1. This head unit broadcasts the pairing signal constantly when no devices are connected. User can complete the pairing steps from your Wireless BT device. Refer to owner’s manual for your device for more details. 2. When the phone finds the car audio system, the “Pyle” name will be displayed.
REMOTE CONTROL 1. Band button, (answer call) button 2/6. VOL+/volume increase button, VOL- volume decrease button 3. MUTE button 4. SEL (selection) button 5/16. (Tune down, seek down; Chapter/ Title/Track down) button (Tune up, seek up, Chapter/Title/ Track up) button 7. PBC (MENU Play, Playback Control) button 8/11/19/20. Cursor Keys (UP, DOWN, LEFT, RIGHT) In DVD/VCD/ MP4/MP3 mode, press these buttons to move the cursors in the menu to choose the item in menu. 9.
SETUP In DVD/VCD playback, press the SETUP button on the remote control to enter the system setup for this unit. The system setup page will be visible on the connected monitor. A. SYSTEM SETUP 1. TV SYSTEM: This DVD player is compatible with playing discs recorded in either PAL or TV SYSTEM NTSC VIDEO PAL NTSC format. Please choose PAL or NTSC TV TYPE AUTO according to the connected monitor type: PASSWORD RATING PAL TV set or NTSC TV set.
Rating 8: [ADULT] -- Select it to indicate that only adults are permitted to view. 6. DEFAULT: Set all values to the factory default values including radio preset stations and other preset memories of this unit. B. LANGUAGE SETUP: User can select the preferred OSD Language, Audio Language, Subtitle Language and Menu Language. The default language is English. C. AUDIO SETUP KEY: This is to select key up and down according to your needs. D.
Features: • AM/FM/MP3/DVD/CD/USB/AUX Marine Stereo Receiver • Double DIN WIRELESS BT Connectivity: • Black Panel • Built-in BT for Wireless • Rear AUX RCA Input Music Streaming • Subwoofer Output • Built-in Microphone for • 2 Pairs Of AV RCA Output Hands-Free Calling • LCD Display with Remote Control • Conveniently Reject/Answer • Marine Stereo Receiver System Incoming Calls • AM/FM Stereo Radio, 30 Station Memory • Compatible with All of Your • Wireless BT Audio Ability Favorite Wireless BT Devices • Aux (
Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.
