User Manual

Remote Control Instructions
Standby key: Press this key to enter standby state when normal operation,
motor, LED do not supply power, display BYBY. Press this key to restart the machine
while in standby, reset the motor, and enter standby mode.
UP increase key: This key can be used to set address code and increase LED
brightness
DOWN deceasing key: This key can be used to set address code and decrease
LED brightness
DMX mode: Switch to DMX mode in any mode
Automatic mode: Press this key to switch to automatic mode when it is not in
automatic mode. Press this key to switch automatic mode in automatic mode
A1~A7 press UP/down key can adjust motor speed
Sound mode: Press this key to switch to sound mode when it is not in sound
mode. Press this key to switch sound mode S1/S2 in sound mode.
Following are Remote manual mode, which is similar to DMX manual mode.
Press any key can to enter into manual mode.
Red light button: Single press function: red light (brightness can be adjusted by
UP/ DOWN key)-> turn o red light-> red light turns on->..
Green light button: Single press function: green light (brightness can be
adjusted by UP/ DOWN key)-> turn o green light-> green light turns on->..
www.PyleUSA.com
4
Mode Selection
Remote manual mode is the same as DMX manual mode