User Manual

Section
ED ( CDIMP31SDIUSB
Pause the Playback
During CDIMP3/SDlUSB playback, press
~ II to switch between play and pause.
@
Note:
* PressingOO in the monitor also performs the
same function.
Skip backward/forward/F.F
/F.REW the playback
Press ~ ( ... or .. ) on remote control to
perform fast reward or fast forward.
C2X -4X -;- 8X-16X~
@ Note:
• This function is operated by using the remote
controL
On Screen Display
During CD status, press OSD button the
display shows:
I Single elapsed -----+ Single remain I
L- Total Total ~
remain ........- elapsed
@ Note:
* This function is operated by using the remote
control.
Program Playing
During CD mode, press (i PROG, the TFT
displays the program menu. Press NUMBER
BUTTONS to select the track Number and
then press
~ to move the cursor to START,
press ENTER to start program playing;
move the cursor to EXIT and press ENTER
to exit the program playing. Move the cursor
to
~ and press ENTER to the previous page;
move the cursor to
~ and press ENTER to
the next page. During this process, press
~ • to cancel the program playing.
@
Note:
* The function is only valid on remote control.
* Press@l CLEAR to clear the mistake input.
Eject SD Card
Push SD card to eject it.
During SD playing mode, to eject SD card
to switch to Disc mode;
if there is no disc in
the main unit, it will switch to USB mode,
or else, it will switch to Radio mode.
During other modes,
to eject SD card to
keep the previous mode.
Eject USB
Pull USB to eject it.
During USB playing mode, to eject USB
to switch to Disc mode;
if there is no disc
in the main unit, it will switch to SD Card
mode, or else, it will switch to Radio mode.
During other modes, to eject USB
to keep
the previous mode.
Section
Before You Start
)
-
Remote Control
Tips:
For more information as to replacing battery, please refer to Replacing the Battery
on page 2,