PLCM4585WIR 2.4Ghz Backup Camera and Video Monitor System Wireless Video Transmission, Waterproof Rated Cam, Night Vision, 4.
Please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as guidelines to assist in installing the system. Please consult an experienced technician if you are not comfortable installing the product. Prior to using and installing the Backup Camera System, please read the safety information provided in this user manual.
surroundings, as the displayed image may be not well lit or not entirely visible. Always proceed with caution and perform double checks before proceeding. • The area displayed by the Backup Camera is limited. It does not display objects hat are close to or just below the bumper, underneath the vehicle, or objects out of the camera’s view. The camera's view can change according to your vehicle's orientation on the road or changing road conditions.
Through installation of this backup camera system, you should be sure as to not degrade, damage orcompromise the safety of any system or device on your vehicle. Improper installation and wiring of the vehicle back‐up camera system may damagethe vehicle's electrical system, including vital vehicle computer and operating systems. That could lead to an accident or fire, causing propertydamage and /or serious personal injury.
Quick Installation: 1. The included 2.4Ghz wireless modules come in two parts, one is the "Transmitter", the other is the "Receiver". • When installing the transmitter accessory cable -- it should connect to the camera -- allowing the camera to transmit video. • When installing the receiver accessory cable -- it should connect to the monitor -- allowing the screen to display video. • Important Note* When installing, be sure to properly identify the Transmitter / Receiver. 2.
Monitor (Receiver): If you decide to create a hard-wired system connection to your vehicle, connect the receiver's red wire of the DC 12V power cable, to the positive 12V reverse tail light in the rear of your car. Then connect the black wire of the DC 12V power cable and ground properly. The transmitter should then be connected to the camera, and will supply power to the camera directly. Installation Transcript: Camera (Transmitter) Connection: a.
Monitor Important Notes: • Determine the best location for the camera (Keep in mind that you must run the cable from the camera to the transmitter). You may need to drill a small hole in the panel near your license plate (The camera is preferably mounted just above the license plate). • Be sure when running the connection cables to leave a small amount of slack so you can still move the camera around the license plate, if you decide to slightly adjust the camera's positioning at a later time.
PLCM4585WIR 2.4Ghz Backup Camera & Video Monitor System with Wireless Video Transmission, Waterproof Rated Cam, Night Vision, 4.3’’ -inch Display System Features: • Wireless Backup Camera & Monitor Parking Assist System • Includes Camera, Monitor and All Necessary Cables & Wiring • 2.
Backup Camera: • Connects to 2.4Ghz Wireless Video Transmitter • Marine Grade Construction • Waterproof & Fog Resistant, IP-67 Rating • Night Vision Low Lighting Capable • Low Lux Performance 1.5 Lux/F1.2 • Built-in Distance Scale Line Display • Preferably Mounting Above the Rear License Plate • Tilt Adjustable Camera Angle • 420 TVL Horizontal Resolution • True Color Reproduction • Total Pixels: 656 x 492 • Wide Viewing Angle: 135 Degree • Auto White Balance • Video Output: RCA 1.
