User Manual

www.PyleUSA.com
2
1. WIRE CONNECTION
Please hard wire the red positive wire connected to the round 1 mm DC
plug (pictured below) to your reverse tail light positive 12V connection
and the black wire to the closest available ground. You will probably
need a small length of wire to reach from your reverse tail light to the DC
plug.
2. Please Attach the camera to your license
plate bracket as shown above. You can
then run your wires so that they are out
of the way.There is one 2 jack on the
camera unit cable, the yellow RCA jack
is for the video output, and red is for
12V DC power supply, and also there is
2 button, the red button is to control
the camera front view or back view
picture image, and black button is
control the scale line on or o.