Specifications

Automotive
Products
Section 11
252
Order Online
www.mcminone.com
NET 30
Terms
11
Constellation™ In–Home
Antenna System
Perfect for using XM
receiver in home or small
office environments. Unit
is easily wall mounted or
attached to a southern
exposure windowpane for
conventional satellite reception. In some areas
where terrestrial repeaters are in use, unit may
even be located inside. Internal amplifier is powered
via the signal cable eliminating the need to connect a
separate power source. Includes attached 35' of dual
RG-174/U cable (satellite and terrestrial), which is
terminated with standard SMA connector.
Order # Mfr. # (ea.) (2–up)
50-6910 XM9150PNP $125.00 $112.50
Constellation™
Retail/Commercial
Building Antenna
System
Perfect for using XM
receiver in retail display
applications or in commercial office buildings.
Provides retailers, automotive dealers and car
stereo installers with uninterrupted XM coverate
for listening stations, service demos or vehicle
installation testing. Kit contains: External
amplified antenna with mounting bracket, feed
cable assemblies and distribution amplifier
(dual receiver models). Includes pre assembled
RG-58/U cable assemblies.
Order # Mfr. # Description (ea.) (2–up)
50-6920 XM911 Single receiver, $299.00 $269.10
100' cable lead
50-6921 XM913 Single receiver, 549.00 494.10
300' cable lead (each)
50-6926 XM923 Dual receiver, 599.00 539.10
300' cable lead (each)
Constellation™
Ultra Flat Roof
Mount Antenna
Convenient peel–and–stick antenna provides simple,
quick and permanent installation, while meeting all
XM radio specifications for mobile applications.
Ultra sleek, low profile design is only
5
⁄8" high,
and 4" diameter, making this ideal where antenna
damage, or appearance is a concern. Includes
attached 14' of dual RG-178/U cable (satellite and
terrestrial), which is terminated with standard
FAKRA/SMB connectors.
Order # Mfr. # (ea.) (2–up)
61-510 XM20/CP $52.45 $47.21
Class D Series Monoblock Amplifiers
Single channel monoblock amplifiers are ideal for
multi-amp autosound systems, especially for powering subwoofers.
Features: •Remote dash-mount level control with cable •Variable
50Hz~150Hz low pass filter •Variable 15Hz~40Hz subsonic filter •Variable
45Hz subwoofer EQ •0°/180° phase selector •High speed digital circuitry
•Fully regulated pulse-width modulated (PWM) power supply •Four-way
protection circuit •System distress indicator •1ohm output stability (2ohm in
model A1000DB) •Bridging synchronization •Gold plated heavy-duty speaker
and power terminals •Dual mono speaker output connectors Specifications: •Frequency response: 15Hz~30KHz
•S/N ratio: 100dB •THD: 0.5% •Input sensitivity: 200mV~8V •Dimensions: 2.3" (H) x 11" (W) x see chart (L)
RMS Power Output Max
Order # Model 4ohm 2ohm 1ohm Output Length (1-3) (4-up)
60-5350 A1000DB 450W 800W N/A 1000W 10.5" $229.00 $205.00
60-5351 A1800DB 600W 1100W 1400W 1800W 12.6" 339.00 305.00
60-5352 A2400DB 900W 1400W 1800W 2400W 15" 379.00 342.00
60-5353 A3000DB 1100W 1800W 2300W 3000W 16.8" 445.00 405.00
Class A/B Series Amplifiers
These amplifiers are an aesthetic match to
the Power Acoustik Class D Series monoblock amplifiers, and are
ideal for powering component speaker systems. Their high power
output, bridging capability and selectable internal crossover also
makes them ideal for full range or subwoofer applications.
Features: •Full selectable crossover for high pass, low pass or
full range operation •Variable 40Hz~120Hz low pass •Variable
150Hz~1500Hz high pass •18db bass boost at 40Hz •2ohm output
stability (4ohm bridged) •Full MOSFET power supply with PWM
circuitry •Three–way protection circuit •System distress indicator
•High level inputs with floating ground •Low level inputs with feed through
low level outputs •4AWG power and ground connections Specifications: •Frequency response:
10Hz~30KHz •S/N ratio: 97dB •THD: 0.02% •Dimensions: 2.3" (H) x 11" (W) x 11.25" (L)
RMS Power output Max
Order # Model 4ohm 2ohm Bridged 4ohm Output (1–3) (4–up)
60-5354 A520-2HP 125W x 2 150W x 2 300W x 1 520W x 1 $89.95 $81.00
60-5355 A600-4HP 70W x 4 85W x 4 170W x 2 300W x 2 109.00 99.00
LT Series Stereo and Four Channel Amplifiers
Ideal for single or multi-amp autosound systems, for powering subwoofers or
satellite speakers. Sleek extruded aluminum housing is augmented by
attractive blue lighting in the side panels Features: •Normal or bridged
mono operation •Full selectable crossover for high pass, low pass or full
range operation •Variable 30Hz~500Hz low pass •Variable 50Hz~500Hz high
pass •Variable 24dB bass boost •Variable 60Hz~200Hz subsonic filter •2ohm
output stability (4ohm bridged) •Full MOSFET power supply with PWM circuitry
•Three-way protection circuit •System distress indicator •Low level inputs with feed
through low level outputs •4AWG power and ground connections Specifications:
•Frequency response: 10Hz~30KHz •S/N ratio: 98dB •THD: 0.02% •Dimensions:
2.25" (H) x 11" (W) x see chart (L)
RMS Power Output
Bridged Max
Order # Model 4ohm 2ohm 4ohm Output Length (1-3) (4-up)
60-5360 LT480/2 100W x 2 125W x 2 250W x 1 480W 8.5" $94.50 $85.25
60-5361 LT620/2 150W x 2 180W x 2 360W x 1 620W 11.25" 109.00 98.25
60-5362 LT980/2 220W x 2 280W x 2 560W x 1 980W 14" 139.00 125.00
60-5363 LT1440/2 300W x 2 360W x 2 720W x 1 1440W 20.5" 189.00 171.00
60-5364 LT1920/2 370W x 2 440W x 2 880W x 1 1920W 22" 215.00 194.00
60-5365 LT720/4 85W x 4 100W x 4 200W x 2 360W x 2 11.25" 129.00 117.00
60-5366 LT960/4 100W x 4 125W x 4 250W x 2 480W x 2 14" 149.00 135.00
XM Antennas
Amplifiers
Gothic Series Stereo and Four Channel Amplifiers
This is an ideal amplifier for single or multi–amp autosound
systems, for powering subwoofers or satellite speakers. Features: •Standard or
bridged operation •Full selectable crossover for high pass, low pass or full
range operation •Variable 40Hz~120Hz low pass •Variable
150Hz~1500Hz high pass •18dB bass boost at 40Hz •2ohm
output stability (4ohm bridged) •Full MOSFET power
supply with PWM circuitry •Three–way protection circuit
•System distress indicator •High level inputs with floating
ground •Low level inputs with feed through low level outputs
•4AWG power and ground connections Specifications:
•Frequency response: 10Hz~30KHz •S/N ratio: 97dB •THD:
0.02% •Dimensions: 2.25" (H) x 11.25" (W) x see chart (L)
RMS Power output Max
Order # Model 4ohm 2ohm Bridged 4ohm Output Length (1–3) (4–up)
60-5370 OV2-300 70W x 2 85W x 2 170W x 1 300W 7.25" $74.95 $67.95
60-5371 OV2-400 85W x 2 105W x 2 210W x 1 400W 8.5" 83.95 75.95
60-5372 OV2-520 125W x 2 150W x 2 300W x 1 520W 11.25" 99.95 89.95
60-5373 OV2-820 180W x 2 230W x 2 460W x 1 820W 14" 135.00 122.00
60-5374 OV2-1200 250W x 2 300W x 2 600W x 1 1200W 20.5" 185.00 167.00
60-5375 OV2-1600 310W x 2 370W x 2 740W x 1 1600W 22" 205.00 185.00
60-5376 OV4-600 70W x 4 85W x 4 170W x 2 300W x 2 11.25" 109.00 99.00
60-5377 OV4-800 85W x 4 105W x 4 210W x 2 400W x 2 14" 135.00 122.00
C50 pg 252 7/25/05 6:36 PM Page 252