PLCD5MRBTS OWNER’S MANUAL Mobile Audio System PLL Synthesizer Stereo Radio AM/FM/MPX PLL RADIO MP3/CD/CD-RW Compatible Automatic Memory Storing USB&SD/MMC Card Interface Fold Down Detachable Panel Auxiliary Input Function Bluetooth Hands-free function & A2DP (Advanced Audio Distribution Profile) Stereo Audio Transmission www.pyleaudio.
CONTENTS Installation...................................................3 Installing the unit....................................3 USB play operation .................................. 13 SD/MMC operation ................................. 13 Bluetooth operation .................................. 15 Preparing for operation ........................ 15 Removing the unit .................................4 Pairing .................................................... 15 DIN Rear-Mount (Method B).............
INSTALLATION Notes: Choose the mounting location where the unit will not interfere with the normal driving function of the driver. Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly. Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions.
INSTALLATION back of the unit in place. Use the supplied hardware (Hex Nut (M5mm) and Spring Washer) to attach one end of the strap to the mounting bolt on the back of the unit. If necessary, bend the metal strap to fit your vehicle’s mounting area. Then use the supplied hardware (Tapping Screw (5x25mm) and Plain Washer) to attach the other end of metal strap to a solid metal part of the vehicle under the dashboard. This strap also helps ensure proper electrical grounding of the unit.
INSTALLATION 4. Lift the top of the outer trim ring then pull it out to remove it. 5. Insert both of the supplied keys into the slots at the middle left and right sides of the unit, then pull the unit out of the dashboard. To fasten the unit to the factory radio mounting brackets. Align the screw holes on the bracket with the screw holes on the unit, and then tighten the screws (5x5mm) on each side. Note: the outer trim ring, sleeve and the metal strap are not used for method B installation.
USING THE DETACHABLE FRONT PANEL To Detach the Front Panel 2. When the two sides fixed into place, push the front panel into main unit. 1. Press the release ( ) button, then the front panel will be folded down. OPEN 3. Note that if the front panel fails to lock in position properly, pressing control button may not function and the display may be missing some segments. Press the release button and then reinstall the front panel again. 2.
WIRING CONNECTION ISO CONNECTION 7
OPERATION LOCATION OF KEYS 1. MODE/PAIR 2. (release button) 3. (hang up)/LOU/BND 4. VOL / SEL/MENU (Audio knob) 5. 6. MUTE 7.LCD 8. 4 SHF 9. 5 DIR10.1PAU 11.2 SCN 12.3 RPT 13. AUX IN 14. 6 DIR+ 15. .USB interface 16 .9 LOC 17. SCAN/# 18.0 DSP 19.*/+/ AS/PS 20.8 EQ 21.7 MON 22.T-MENU/TRANS 23. 24. (pick up) 25. Reset button 26. SD/MMC interface 27.Mic 28.eject button 29.disc slot 30.
OPERATION EQUALIZATION Press EQ button (20) shortly to turn on equalization function and to select desired audio mode. There are five kinds of mode as below: BASIC OPERATION SWITCHING ON/OFF THE UNIT Press button (6) to turn on the unit. When the unit is on, press and hold button (6) to turn the unit off. FACEPLATE RELEASE Press button (2) to removable faceplate. detach →CLAS→POP →ROCK→EQ OFF the RESET FUNCTION RESET button (25) must be activated with either a ballpoint pen or thin metal object.
OPERATION the P-VOL to 40. If the volume value is small than 40 when you turn off the unit. Next time you turn on the unit. The volume will keep the last volume value. But if the volume value is large than 40 when you turn off the unit. Then next time you turn on the unit. The volume value will back to 40. 3) Area Europe/USA: Use SEL button (4) to set the radio frequency to Europe frequency or USA frequency. 4) HOUR 24/12 You can select time format to 12 hour or 24 hour format. (In AREA item.
OPERATION previous/next file. File number will be showed on display. Press and hold / (5/23) will fast reverse/forward. File play starts when you release the button. The unit can be shockproof about 70 seconds around for MP3 /WMA. SELECTING DIRECTORY UP/DOWN Press DIR- button (9) or DIR+ button (14) to select directory downward or upward. If the USB driver does not contain any directory, there is no function of pressing DIR- button (9) or DIR+ button (14).
OPERATION Press AS/PS (SCH) button for four times. The unit searches file or directory from current directory by button (4). The currently playing file name is displayed. User can select the file by button (4). After selected a file. Pressing BND/LOU or SEL button to play. If you would like to listen to a song which is in different directory.
OPERATION In the front panel of the unit, there is an USB interface (15). You can connect an USB driver through this interface (15). When you connect an USB driver through the interface, the unit will search the MP3 files or WMA files in the USB driver and start to play MP3 files or WMA files automatically. If in other mode, you can also press MOD button (9) to select USB mode. 3. Dirt, dust, scratches and warping discs will cause misoperation. B. Notes on CD-Rs (recordable CDs)/CD-RWs (rewritable CDs): 1.
OPERATION SD/MMC mode. shortly, after the current song play to the end, It will play the song in current category in random order, and “SHF” will appear on the display. Press it again to exit this mode. Press it for 2 seconds to play all songs in the album and “D-SHF” will appear on the display Press it again to exit this mode. CAUTION When there are important files in the USB device or SD card. Do not connect it to the cmain unit to play. Because any wrong operation may cause files loss.
OPERATION 2) panel, “PAIRING” will appear on the LCD. the unit, and you want to transfer the audio to the unit, you need to reconnection. 3) On the mobile phone, select the Bluetooth set up. (Please refer to the 3) When you press instruction manual of your mobile release the front panel, the connection phone on how to operate Bluetooth.) will be break off. When you install the front panel, you need to reconnection.
OPERATION number (memory 10 numbers). TALK volume MAIN volume 00 = 60 01 = 62 02 = 64 …………………….. 4) MISSED: Display the call you have missed (memory 10 numbers). 5) PHONE BK: You can copy 20 phone numbers from mobile to the phone book 2 of the unit via Bluetooth 20 = 100 transmitted.
OPERATION phone, the mute of the present mode will be released at the same time. 2) When making an outgoing call, it’s not possible to transfer if the call is not being answered yet. BT reset: ：In BT AUDIO mode. Press and hold BND/LOU/ key for several seconds. Some of the bluetooth information and phone numbers will be lost. BLUETOOTH FUNCITON) AUDIO (A2DP The unit supports Bluetooth audio function.
SPECIFICATION GENERAL Power Supply Requirements : DC 12 Volts, Negative Ground Chassis Dimensions Tone Controls - Bass (at 100 Hz) - Treble (at 10 kHz) : 178 (W) x 107 (D) x 50 (H) : ±10 dB : ±10 dB Maximum Output Power : 4x60watts Current Drain : 15 Ampere (max.) RADIO For 2 Bands FM Frequency Coverage IF Sensitivity (S/N=30dB) Stereo Separation 87.5 a 108 Mhz 10.
REMOTE CONTROL HANDSET(OPTIONAL) FUNCTION KEY & CONTROL 1. 2. 3. POWER DSP(0) SEL 4. VOL 5.
TROUBLE SHOOTING Before going through the checklist, check wiring connection. If any of the problems persist after checklist has been made, consult your nearest service dealer. Symptom No power. Cause Solution The car ignition switch is not on. If the power supply is connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. Temperature inside the car is too high.
