Datasheet

2. BT PHONE
1) Make a call
(1) Dial with mobile phone directly;
(2) Dial with the controls on remote control or on control panel
a. Press the button on control panel or the button on remote control to
display PHONE in the LCD;
b. Use the number buttons to input your desired phone number;
* When inputting a wrong digit, use the BAND button on control panel or the
button on remote control to delete it.
c. After finishing inputting, press the button on control panel or the button on
remote control to dial out.
2) Redial last dialed phone number
Press the button on control panel or the button on remote control twice
to dial out the last dialed phone number.
1. Pairing and Connecting
Prior to using the BT device named BT CAR STEREO as a handfree system for a
BT-enabled mobile phone for the first time, you must as
follows:
* In any mode, prior to pairing and connecting, the BT logo flashes in the LCD.
1) Press the PAIR button on the control panel to display “PAIRING”(press the BAND
button to cancel pairing);
2).Switch on the BT mode of your mobile phone; then s BT
device and enter it; device car audio
BT CAR STEREO , select it and enter it; then it will show an
interface that asks you to input a password, input 0000 and enter it; then i
with the BT device BT CAR STEREO of the car audio system,
Confirm it, then the BT logo will not flash and light all the time.
* finishing pairing and ing
or the mobile phone
plays music
pair and connect them
elect the item to find a
When it finds the BT of the system, the name
will be displayed
t will
pair and connect
When connect , the audio of the mobile phone transfers
to the car audio system whenever a call is made or received
.
BT Operation
-12-