User Manual

- 9 -
DISC / USB OPERATION
To insert DISC / USB
•
To play files on a disc, insert a disc with the label surface facing upward into the disc slot.
Playback will begin automatically.
• To play files on a USB device, open the USB port cover and insert the USB storage device into the USB
port. Playback will begin automatically.
Eject Disc/USB
•
To eject a disc, press the button to stop playback. Press the (eject) button to eject the
disc and then remove it
• To eject a USB device, press the button to stop playback, then remove the USB device.
Play/Pause
Press the (play/pause) button to pause or resume playback.
Next/Previous Track
•
To play the next track, press the button.
• To play the previous track, press the button.
Fast Forward/Backward
•
To fast forward, press and hold the button.
• To fast backward, press and hold the button.
Introduction Scan
Press the INT button to play the first 10 seconds of each track, press again to stop the introduction scan,
and play the current track.
Repeating the same track
Press the RPT button to toggle between RPT ALL (Play all track), RPT FLR(Continuously repeats all
tracks in current folder), and RPT ONE (Continuously repeats current track).
Playing all tracks in random
Press the RDM button to play all tracks in random order, press again to cancel this function.
Track/Folder Navigation
•
During a disc, USB mode, press the 5/-10 button to go backward 10 tracks.
Press the
6/+10 button to jump forward 10 tracks.
• During a MP3 disc, USB mode, press and hold the 5/-10 button to go back the previous folder.
Press and hold the
6/+10 button to go to the next folder.
You can repeat this function depending on the number and level of folders.
• These buttons have no this function if the USB device has no folders.
Label surface up