PLATVB84A 800 Watts Motorcycle/ATV/Snowmobile Mount with Dual Handle-bar Mount Chromed Plastic Weatherproof 3-Inch Speakers In-Line Control For iPhone, iPad, iPad Mini,Cell Phone Etc. OWNER’S MANUAL www.pyleaudio.
premier Congratulations on your purchase of this amplified speaker system.Like all products,this motorcycle system has been thoroughly tested to ensure consisten,reliable performance under some rigorous conditions.Our systems were designed to with stand water,moisture,heat,and direct sun exposure.We pride ourselves in customer satisfaction.
What is included? Upon un-packing your new Series audio system, Please check to ensure you have all the included parts.
Connections Left Speaker Right Speaker Black/white (+) Black (-) Aux IN Power Cable Adaptor Loudspeaker Mounting Diagram 3
Installation 1. Screw the brackets to the bottom of the speakers. 2. Find a safe, ideal mounting location and fit the brackets over the chosen mounting bars. 3. Fasten the mounting screws after you review the safety of the mounting location Wiring 1. Be sure to run the wiring securely and far away from any moving components. 2. Connecting the power cable to the power source:you will need to connect the 12V red wire to a (fused 5A) switched power source 3. Use the 3.
Bluetooth Pairing and Connection: 1. Connect Bluetooth controller box to your device 2. Press and Hold >|| for three seconds until power indicator lights (red) 3. The system will automatically go into pairing mode The power indicator will turn red for about 7 seconds and then alternating red and blue (Bluetooth blue Power red) Please be sure that Bluetooth is turned on your device Select Pyle Audio on your device to connect Bluetooth controller (if the 4.
BLUETOOTH INSTALLATION 10 (item#7) 6
www.pyleaudio.
