Instruction Manual PL91HR PL91HRGR Adjustable Headrest w/Built-in 9" TFT-LCD Monitor with IR Transmitter HTTP://WWW.PYLEAUDIO.
Warning Read this manual before using this product. This product is composed of precision components and should not be dissembled Service must be perfurmed by a factory authorized technician. Protect the product from moisture and shock. Attentions: 1. When connect the electric power wires, you should make clear about the positive and negative electrode ( the red one is positive and the black is negative). If you wrongly connected the fuse in the filter box will be broken protectively.
UNIVERSAL HEADREST WITH PRE-INSTALLED MONITOR OWNER'S MANUAL Congratulations on your purchase of this headrest monitor system. The product is designed and built to deliver excellent video quality and long lasting high performance. For best results please consult a professional mobile electronics installer for application advice or troubleshooting. Please read these instructions thoroughly before installation. Installation Instructions 1. Remove the existing headrest from the seat. 2.
Install the Pillow Sound system VCD/DVD Red line (+12V) Black line (ground) Yellow line (signal) How to use the adapter tubes 3
Monitor Controls and Features PL91HRGR 1 2 3 4 5 6 7 8 1. Earphone jack 2. V2 in(Alternate video input) 3. Mode switch 4. V1/V2 switch 5. Negative adjustment 9 6. Activation of menu indicator 7. Positive adjustment 8. Power ON/OFF 9.
Remote Contorl Power ON/OFF V1/V2 conversion Analog variable decrease Analog variable increase Menu button Switch for mode Changing the battery in the remote control The remote battery is held in a small " drawer" on one edge of the remote. To open this drawer, press and hold the small button on the edge of this drawer (as shown below) and slide the drawer out. Insert a new battery and push the drawer back fully into the remote.
Specification - Available in BLACK, GRAY, TAN - Adjustable mounting poles to fit any seat - Poles adjustable from 12.5cm to 20cm - 9" wide (16:9) TFT LCD monitor - High resolution: 1024xRGBx600 - 1 set wired AV input - Faceplate AV mini-jack input - Faceplate mini-stereo jack output for wired headphones - Color system: PAL/NTSC - Contrast ratio: 300:1 - Brightness rating: 350 cd/m2 - Built in dual channel IR transmitter Channel A: 2.3Mhz (left), 2.8Mhz (right) Channel B: 3.2Mhz (left), 3.
Accessories 7" TFT LCD Pillow Monitor 1 Wireless Remote Control 1 Assembling Stick 2 AV Input Line 1 Power Wire 1 User's Manual 1 Thank you for purchasing the headrest TFT LCD color monitor. To enjoy the features of this device and to ensure years of trouble-free operation, please read this manual carefully and follow the instructions. WARNING: Hazard do not operate this unit unless vehicle is parked in safe and legal area.
