Instruction Manual PL90HR PL90HRBK Adjustable Headrest w/Built-in 9" TFT-LCD Monitor with IR Transmitter HTTP://WWW.PYLEAUDIO.
Warning Read this manual before using this product. This product is composed of precision components and should not be dissembled Service must be perfurmed by a factory authorized technician. Protect the product from moisture and shock. Attentions: 1. When connect the electric power wires, you should make clear about the positive and negative electrode ( the red one is positive and the black is negative). If you wrongly connected the fuse in the filter box will be broken protectively.
2
Install the Pillow Sound system VCD/DVD Red line (+12V) Black line (ground) Yellow line (signal) How to use the adapter tubes 3
Monitor Controls and Features 1 2 3 4 1. V2 in(Alternate video input) 2. Power on/off 3. Activation of menu indicator 5 6 4. IR remote window 5. Negative adjustment 6.
Remote Control Power ON/OFF V1/V2 conversion Analog variable decrease Analog variable increase Menu button Switch for mode Changing the battery in the remote control The remote battery is held in a small " drawer" on one edge of the remote. To open this drawer, press and hold the small button on the edge of this drawer (as shown below) and slide the drawer out. Insert a new battery and push the drawer back fully into the remote.
Specification - Available in BLACK, GRAY, TAN - Adjustable mounting poles to fit any seat - Poles adjustable from 12.5cm to 20cm - 9" wide (16:9) TFT LCD monitor - High resolution: 1024xRGBx600 - 1 set wired AV input - Faceplate AV mini-jack input - Color system: PAL/NTSC - Contrast ratio: 300:1 - Brightness rating: 350 cd/m2 - Built in dual channel IR transmitter Channel A: 2.3Mhz (left), 2.8Mhz (right) Channel B: 3.2Mhz (left), 3.
Accessories 9" TFT LCD Pillow Monitor 1 Wireless Remote Control 1 Assembling Stick 2 AV Input Line 1 Power Wire 1 User's Manual 1 7
