User Manual

www.PyleUSA.com10
SYSTEM SETUP FOR DVD MODE
Setup
Follow the steps below to check the connection:
1. Turn ON the TV and shift to “VIDEO INPUT”.
2. Turn ON other units such as an audio or VCR if they are connected.
Turning the Unit ON:
1. Press the POWER button on the panel. The DVD player will automatically read a
disc if it has already been inserted in the player.
2. Press the OPEN/CLOSE button to open the disc tray to insert or replace a disc.
3. Insert a disc onto the disc tray and press OPEN/CLOSE button again to close
the disc tray. The Screen will display disc type.
4. The DVD player will select the states of playback.
Note: PBC is the abbreviation for PLAYBACK CONTROL. If a disc has PBC, it means
that it has a menu from where you are able to choose a track, chapter or other
instruction at the beginning of playback.
Playing a Disc
Turning the Unit OFF
Press the STOP button, then press the OPEN/CLOSE button to open the disc tray.
Remove the disc and close the disc tray by pressing the OPEN/CLOSE button
again. Then press the POWER button to turn o the player. It is recommended
that discs are removed before the player is turned o. Remove the plug from the
outlet on the wall if the player will not be used for a long time.
DIS C FO RMAT STATE OF PLAY
CD/ MP3 First track.
VCD/SVCD with PBC
From the menu screen, press the PBC button
on the panel or on the remote control to play
back from the beginning.
VCD/SVCD without PBC Automatically plays from the beginning.
ACTION BUTTON ON PANEL KEY ON REMOTE CONTROL
Play
PLAY/PAUSE PLAY
Pause
PLAY/PAUSE PAUSE
Next track or chapter NEXT NEXT
Previous track or chapter
PREV PREV
Stop
STOP STOP