Instruction manual

Note:
- Any changes or alterations made to target hour and minute will automatically enable the target
time alert function.
- If no keys are pressed or held for 60 seconds during the target time and heart rate setting
mode, the unit will automatically return to the chronograph mode and all previous data will be
kept.
- At anytime, to exit the target time and heart rate setting mode, press and hold the MODE/SET
key for 3 seconds.
- If you set the target time value to be 0 hour and 0 minute, this will automatically trigger the
target time function to be disabled.
Memory Recall Mode
1. Press the MODE/SET button until you have reached the memory recall mode which is
represented by 'MEM'.
2. After 3 seconds, another display should appear displaying the lap number. To review data
from a specific lap, press or hold the START/LAP/RESET button to increment the lap number.
3. Once you have reached your desired lap, press the MODE/SET to confirm and review the
data for that particular lap.
4. To scroll through the data, press the SUB/EL button.
14