User Manual

www.PyleUSA.com
Built-In Safety Features
Short cut, overload, and overheat protection keeps this amp, as well as other
connected devices, functioning properly and safe. The built-in loudspeaker protection
circuit triggers when the amplier is turned on to protect your speakers from high
volume bursts of audio. Overload protection shuts down the amplier if input
voltage exceeds 14.4 volts.
Features and Technical Specs:
• 12V AC/DC Adapter
• Class-T Circuit Design
• Microphone Input Jack
• Speaker Impedance: 2-8Ω
• 3.5mm iPod/MP3 Input Jack
• Signal to Noise Ratio: >80dB
• Total Output Power: 90 Watt
• Input Power: DC 9 ~ 14.4V 2A
• Total harmonic distortion: <0.4%
• Frequency response: 20Hz-20kHz
• Short Cut, Overload & Overheat Protection
• Dimensions: 6.02'' x 4.96'' x 1.5''
Questions? Issues?
We are here to help!
Phone: [phone]
Email: [e-mail]
This product can expose you to a chemical or group of checmicals, which
may include ”Nickel Carbonate” which is known in the state of California to
cause cancer, birth defects, or other reproductive harm. For more info, go to
https://www.p65warnings.ca.gov/.