Instruction manual

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Power button: Turns ON/OFF the receiver
Squelch control button.
Volume Control: Rotate the knob to increase or decrease the volume
of the receiver output.
Antenna "A":Supply the RF for receiver
Antenna indicator "A".
Antenna"B":Supply the RF for receiver
Antenna indicator "B"
Audio indicator: The green light of the AF signal indicator glows
according to the volume of the microphone when talk or sing to
transmitter
Low battery indicator: This light glows when there is less of useful
operating time, allowing battery to be changed before power is depleted.
(Use 1.5VAA BATTERY)
Power on indicator: This light glows when the receiver is plugged into an
electrical outlet and switch is pushed, it indicates that the receiver is on.
2 RECEIVER FEATURES
1.
2.
3.
4.
5.
6.Battery cover:Open the cover and set 1 XAAA(1.5V)Alkaline battery.
Power and audio mute switch: push the switch to "ON" position, the
indicator shines for a moment. Pushed the switch to the middle of
"ON""OFF" position, allows muting the microphone audio, avoiding
the "thump "noise that can occur when turning the microphone audio.
it is recessed to prevent it from being accidentally turned off.
Gain control switch: Adjust audio level, for fitting all kinds of signal input,
it is on the "L "position in the factory.
Antenna:Supply the RF for transmitter
.6.35mm audio plug.
Low battery indicator: This light glows when there is less of useful
operating time, allowing battery to be changed before power is depleted.
(Use 1.5V AAA battery)
11.
12.
13.
Battery cover: Open the cover and set 2X1.5VAA)Alkaline batteries.
1/4" phone jack audio output connector (Unbalanced high Z): An
unbalanced audio cable with 1/4" phone plug(such as standard guitar
cable)can be used between this connector to your amplifier input
Power input connector: Connect the AC adapter to this jack and then
plug into an AC electrical outlet.(Please use supplied AC adapter)
3 TRANSMITTER FEATURES
3 4