UHF PDWMG46 www.pyleaudio.
CATALOG Thank you for purchasing our product, please read this instruction manual carefully so that you will understand how to operate the unit that you FOREWORD ............................................................................................2 purchased correctly. Please keep and store this instruction booklet in a safe place after reading it for future reference. This series of professional SYSTEM FEATURES ................................................................................
2 RECEIVER FEATURES 11. Battery cover: Open the cover and set 2X1.5VAA)Alkaline batteries. 12. 1/4" phone jack audio output connector (Unbalanced high Z): An unbalanced audio cable with 1/4" phone plug(such as standard guitar cable)can be used between this connector to your amplifier input 13. Power input connector: Connect the AC adapter to this jack and then plug into an AC electrical outlet.(Please use supplied AC adapter) 3 TRANSMITTER FEATURES 1. Power button: Turns ON/OFF the receiver 2.
SYSTEM CONNECTION 2.Effectiver Range 50m(150ft)Under optimal conditions NOTE:Actual working range depends on RFsignal absorption, reflection, and interference from objects and environment. 3.Audio Frequency Response Typioally 50Hz to 15,000Hz, 3dB NOTE:System response is depend on the using accessory of microphone 4.Modulation:FM 5.Audio bandwidth:40Hz to 20kHz 1. Connect the supplied AC power adapter into the DC INPUT connector in the back of the receiver, plug the adapter into a wall socket 2.
