User Manual
www.PyleUSA.com
9
www.PyleUSA.com
10
SYSTEM SPECIFICATIONS
• RF Carrier Frequency Range:
Approximately 523 to 597.8 MHZ (Available frequencies depend on
applicable regulations in country where system is used).
• Operating Range: 50m (approximately 164ft) under typical conditions
• Audio Frequency Response: 100 to 18,000Hz, ±3dB
• THD: <1%
• Mobile state Range: > 100dB
Operating Temperature Range
-20.2°F to 165.2°F (-29°C to 74°C)
NOTE: Battery characteristics may limit this range.
OPTIONAL ACCESSORIES
1/4" to 1/4" Cable (The Guitarist -UHF only)
1/4" to Miniature Connector
1.8 Meter (6ft.) Receiver-Mixer Cable
RECEIVER SPECIFICATION
C ONFERENCE MICROPHONE SPECIFICATIONS
System Features:
• Professional UHF Conference Microphone System
• Desktop, Tabletop Oce Microphone Style
• Includes (8) Tabletop Goosenecks Mics
• Multi-Channel Selectable Frequency Setting
• Hassle-Free Audio Operation
• Simple Electric Plug-in Design
• Independent Channel Volume Adjustment
• Extended Wireless Operating Range
• Mobile Anti-Interference Cartridge
• Low Distortion Condenser Mics
• LED Audio Signal Indicator Lights
• Used for Home, Oce, School & Business Applications
What’s in the Box:
• Microphone Receiver Base
• (8) Wireless Conference Table Mics
• (16) ‘AA’ Batteries
• Foam Mic Windscreens
• Removable Receiver Antennas
• Audio Connection Cable
• Power Adapter
Microphone Receiver Base:
• Front Panel Receiver Audio Control Panel
• Digital LCD Display with Channel & Frequency Readout
• Independent Channel Volume Adjustment
• (8) XLR (3-Pin) Balanced Output Connectors
• (2) 1/4’’ -inch Mixed Output Jacks
• Power ON/OFF Switch
• Rack-Mountable System Compatibility
• AF (Audio Frequency) & RF (Radio Frequency) Indicators
• Total Receiver Size (L x W x H): 18.9'' x 7.8'' x 3.9'' -inches
Power Requirements
120
V
or
230
V
A
C
adaptor
with
2.
1
mm
femal
e
plug
Power Requirements
13 -15 V DC nominal,500mA+
Signal/Noise
Ratio
MORE THAN
85dB
Border Upon Channel
Rejection
MORE
THAN
70dB
Image
& Spurious Rejection
MORE
THAN
70dB
Audio Output
Level
Receiving Sensitivity
-105dBm
Dimensions
482MM X 223MM X
97MM
0-±300mV
174MM X113MM X 48.5MM(Φ19.5*410MM)
X 2
7