User Manual
www.PyleUSA.com
2
www.PyleUSA.com
3
FOREWORD
Please read this manual thoroughly before you attempt to set up and use the 
Wireless Microphone System. It contains a range of installation suggestions as 
well as instructions to ensure safe usage. Installed properly, you can expect 
years of trouble-free service from this product.
Main Features
1. Using VHF 170-215.8 VHF band to avert interferencing frequency.
2. Using multi level high frequency and mid frequency narrow band lter, so as 
 to dispel any possible interferencing signals.
3. A specially designed circuit switch is on the phone. It is for clearing up waves 
 of miscellaneous signals
4. All use quartz crystal oscillating circuits, so the frequency is very steady.
5. With audio compressing-expanding technology, the machine can lower
 noises and increase the dynamic range. It can also lower reecho.
6. It has separate channel and mix output, and it can be connected with the   
 sound-adjusting stage and the karaoke enlarge.
7. Special key tone locked identity functions to avoid interference signal
 from outside. Opens the mute system.
8. There are multiple noise detect multi-circuits. With strong anti-jamming   
 function.
9. Uniform cardioid pickup pattern isolates the main sound source and minimizes 
 background noise
10. Eective, built-in spherical wind and pop lter.
11. Longest distance in open:100m. Idealest distance in open: 50m
Cautions
1. Please ensure to place the host receiver in a place where it has good condition 
 for signal, without dead angle.
2. Please keep the microphone transmitter from throwing, casting, and so on.   
 Care should be taken to protect against breaking.
3. Non-waterproof. Protect the receiver from rain or water to prevent a short   
 circuit.
4. Please keep distance with or away electromagnetic eld, high voltage
 power net or big metal subjects.
5. Please switch OFF the transmitter when you change the battery.
6. Please put out the battery if you will not use the microphone for a long time.
7. Please plug out the reciever if you will not use the microphone for a long time.
8. If any part of the product is damaged, please contact your dealer/distributor  
 or nearest service center
9. This warranty does not cover service or parts to repair damage caused by   
 accident, neglect, abuse, normal & wear, disaster, misuse, abuse, overpowering, 
 negligence, inadequate packing or shipping procedures and service, repair or 
 any modications to the product which have not been authorized or   
 approved by PyleUSA.
TECHNICAL PARAMETERS
Unit Specication
Frequency range
Frequency stability
Modulation
Frequency response
T.H.D
Distance
Temperture
Reciever
Receiving system
Sensitivity
Removing weight
Audio output
Output connection
Power supply
170-215.8MHz VHF band
±0.005%
FM
40Hz-18KHz (3dB)
-0.8%
50-100M
14-131°F (-10-55°C)
Quartz crystal frequency
10UV/40DB emf
50ms
0-0.35Vp-p 5k
6.3 mm plug
DC:12-17 V





