User Manual

5 6
TRANSMITTER BATTERY INSTALLATION
1. Battery Installation of Handheld Microphone: Open the battery cover,
Insert the supplied batteries into battery jar in polarity and cover the battery
2. Battery Installation of Bodypack Transmitter:Push open the battery cover,
Insert the supplied batteries into battery jar in polarity and close the battery
cover.
Rotate
counterclockwise
to open.
Push down
to open.
BELT-PACK
TRANSMITTER
DISPLAY
BODYPACK TRANSMITTER CONNECTION
1. Lavalier Microphone Connection: Connect the connecter of supplied
lavalier microphone to the connecting jack of transmitter (shown as below)
Set the transmitter work state in wireless lavalier system(L).
2. Headset Microphone Connection: Connect the connecter of supplied
headset microphone to the connecting jack of transmitter(shown as below)
Set the transmitter work state in wireless headset system(H).
OPERATING INSTRUCTIONS
1. Receiver Operation
Power on receiver, press two "UP" buttons of module 2 and 3 together for
1 second to enter the adjustment, when the LCD displays "UnLOC", it is
under "Normal Operation". When the LCD displays "LOC", it is under
"Locking Operation".
a. Normal Operation
-Press and hold "UP"/"DOWN" button, release the button once the CH
number begins to flash
-When it is flashing, continue to press "UP"/"DOWN" button to increase
/decrease the channel orderly, select the desired channel
-The selected channel will be save automatically without any action for 5
seconds.
-Please refer to the following list for showing the adjusting channels.