Manualshelf

User Manual

ManualsBrandsPyle ManualsMicrophones4 Channel UHF Wireless Microphone System & Rack Mountable Base 4 Headsets, 4 Belt Packs, 4 Lavelier/Lapel MIC With Independent Volume Controls AF & RF Signal Indicators
12345678
Table Of Contents
SYSTEM CONNECTION
1. Receiver Power Connection: Connect the DC connector of supplied AC/DC
adapter into the DC power input of receiver. Plug the AC input connecter into an
AC120/60Hz or AC220V/50Hz outlet. (Shown as below)
3. Audio Connection: Connect the corresponding output of receiver by supplied
1/4" phone jack audio cable or your XLR cable to the input of power amplifier,
mixer.
2. Antenna: Keep the position of antenna at a 45 angle from vertical, .(Shown
as below)
8
BODYPACK TRANSMITTER CONNECTION
1. Lavalier Microphone Connection: Connect the connecter of supplied
lavalier microphone to the connecting jack of transmitter (shown as below)
Set the transmitter work state in wireless lavalier system(L).
2. Headset Microphone Connection: Connect the connecter of supplied
headset microphone to the connecting jack of transmitter(shown as below)
Set the transmitter work state in wireless headset system(H).
7
3.Guitar Cable Connection: Connect the connecter of supplied guitar cable
to the connecting jack of transmitter and the other connecter to guitar(shown
as below), set the transmitter work state in wireless guitar system(G).