User Manual

www.PyleUSA.com
12
MP3/MPEG4 Disc Playback
After the unit loads a MP3/MPEG4 disc, a menu showing the contents of the disc will display on the screen.
1. Press the direction key [UP] / [DOWN] to select a le or a folder.
2.1. Press [OK] to enter the selected folder. The le or the folder in it will be listed instantly.
2.2. Press [OK] to begin to play the selected le.
3. When the disc is stopped press [LEFT] to return to the superior menu.
Kodak Picture CD Playback
1. Place a Kodak picture CD in the disc tray and the unit will load the disc automatically.
2. Press [B] to display the menu showing the contents of the disc.
In the menu, use the direction keys [UP] / [DOWN] to select a picture, then press [ENTER] / [ ] to start
the playback from the selected picture.
[GOTO]: Press this button, then use the digit keys to select a picture and playback from the selected
picture begins.
[ ]: Press to pause the playback; press it again to resume the playback.
[ ]: Press to begin a playback or resume a playback.
[REPEAT]: Press repeatedly to switch the repeat modes (Single—Repeat One—Repeat Folder—Folder
—Cancel repeat).
[ ][ ]: Press to skip to the previous/next picture during playback.
[Left] / [Right](on the remote control): Press to rotate the picture counter clockwise/clockwise during
playback.
[ZOOM]: During playback, press [ZOOM] repeatedly to zoom in/out of the picture or to return to the
original size. When the picture is zoomed in, the direction keys can be used to move the picture.
USB & SD/MMC CARD PLAYBACK
Insert a USB or a card reader into the USB port. Press [SOURCE SELECT] to select USB mode to play the
readable les in it. Insert a SD/MMC card into the SD/MMC card port. Press [SOURCE SELECT] to select
MCR mode to play the readable les in it.
WARRANTY EXCLUSIONS
The warranty will not be valid if:
1. The product has not been installed, operated or maintained in accordance with the manufacturers
operating instructions provided with the product.
2. The product has been used for purposes other than its intended function.
3.The product has been used for purposes other than household use.
4. The damage or malfunction of the product is caused by any of following conditions:
• Incorrect voltage
• Accidents (including liquid or moisture damage)
• Misuse or abuse of the product
• Faulty or improper installation
• Mains supply problems including power spikes or lightning damage
• Infestation by insects
• Tampering or modication of the product by persons other than authorised service personnel
• Exposure to abnormally corrosive materials
• Insertion of foreign objects into the unit
• Used with accessories not pre-approved
Please refer to and heed all warnings and precautions in the User Manual.