User Manual

Thanks for choosing Universal Equipment/Electronic Device Rack Stand

• Open the box you will nd below parts, A,B,C,D

• Install 4 casters on the B, two with brakes should be in front

• Connect two B with E with the equipped bolts

• Insert D into the top of two B and x with two equipped plastic knobs

• Mount two C on D with equipped bolts and screw

• Tighten all the bolts, knobs then you can use this rack

• Then you can mount your 19" equipment on the rack and put your other equipment on the top brackets

C, such as the mixer, keyboard, control workstation