PDIC83T 8’’ In-Wall / In-Ceiling 70V Speaker Flush Mount Low-Profile Speaker with 70 Volt Transformer (600 Watt)
PDIC83T SPL 120.0 110.0 100.0 90.0 80.0 70.0 60.0 50.0 20 100 1K 10K 20K Frequency Response PDIC83T IMP 40.0 30.0 20.0 10.0 2.0 20HZ 100 1K 10K 20K Frequency Response 3.94 ” (100mm) 3.54” (90mm) 9.29” (236mm) 10.67” (271mm) Side View 1 www.PyleUSA.
• Speaker Installation 1 2 Cutting guide 3 4 5 6 2 www.PyleUSA.
1. Position the cutting guide against the required speaker placement and trace around. 2. Cut out the traced area using a pad saw or other suitable tool. 3. Take the speaker unit out of the packaging and remove the grille. Connect the speaker wire to the appropriate “+” and “-” connections (select the desired tapping for 70V device). 4. Locate the speaker unit into the cut-out, ensuring that the 4 rotating fixing clamps stay turned inward. 5.
PDIC83T 8’’ In-Wall / In-Ceiling 70V Speaker Flush Mount Low-Profile Speaker with 70 Volt Transformer (600 Watt) Features: • In-Wall / In-Ceiling Speaker System • Built-in 70 Volt Transformer Tapping • Flush Mount, Slim Low-Profile Design • 2-Way Full Range Stereo Sound • High-Impedance, Line-Matching Transformer • Used for Amplifier / PA Speaker Public Address Systems • Mounts Flush on Walls or Ceilings • 1/2'' High Compliance Dome Tweeter • Poly Mica Cone with High-Sensitivity Foam Edge • Cut-Out Size Tem
