Manual

The PDC22 can be quite useful on stage or in the studio for connecting unbalanced devices,

particularly key boards. The output levels of many keyboards are low. So their signals can

benefit greatly by connecting their unbalanced outputs to the PDC22 by doing so the signal

can be sent cleanly for long distances while benefiting from the low noise and common

mode rejection provided by PDC22’s balanced low-level output. The diagram following

shows a typical hook-up for a stereo keyboard connected to a stereo stage monitor system

and the main PA mixer.

Frequency Response 5-35 KHz, -3dB

Noise Level(22-22KHz, Input Shorted) -104dBu

THD + N(10Hz-22KHz) 0.013% typ. @ 1 VRMS,

1KHz

Input Impedance 50K Ohm

Max. Input Level (1% THD) +8.1 dBu (9V. Batt)

+11.3dBu(48V.Phantom)

Instrument Input 1/4” Phone Jack,

unbalanced

Parallel (link) out 1/4” Phone Jack,

unbalanced

BALANCED OUTPUT XLR Connector,

balanced

Dimensions: 5.51”x4.72”x1.57”

ecifications:

-5-