Manual

NOTE: TO avoid annoying pops and clicks be sure to mute (or
turn down the volume control) of your mixer’s output while
connecting the PDC22.
The PDC22 provides the capability of tapping off the signals from amplifiers,
such as the output or guitar amp or power amplifier. You can even use PDC22
to connect to the speaker output of a consumer stereo system or boom box, for
example, if you want to sample some old records or cassette tapes.
NOTE: Be sure that the ATT switch is set to (-20db or -40db)position before
connecting the signal from the output of any amplifier.
Follow the diagram and steps below to connect a powered output of a guitar
amplifier to a PA mixer.
·connect the output of the guitar or bass to the guitar amp input.
·Set the ATT switch to the -20db or -40db
·Using unshielded speaker cable, connect the guitar amp’s speaker output to the
PDC21’s INPUT
·Using another unshielded speaker cable, connect PDC22’s PARA OUT to the
input of the guitar amplifiers speaker
·Connect PDC22’s BALANCED OUTPUT to the input of main PA mixer.
Connecting to High Power Signals
-3-