User Manual

www.PyleUSA.com

Connecting to High Power Signals

The PDC22 provides the capability of tapping o the signals from ampliﬁers, such as

the output or guitar amp or power ampliﬁer. You can even use PDC22 o connect to

the speaker output of a consumer stereo system or boom box, for example, if you

want to sample some old records or cassette tapes.

NOTE: Be sure that the ATT switch is set to (-20db or -40db) position before

connecting the signal from the output of any ampliﬁer.

Follow the diagram and steps below to connect a powered output of a guitar

ampliﬁer to a PA mixer.

• Connect the output of the guitar or bass to the guitar amp input.

• Set the ATT switch to the -20db or -40db

• Using unshielded speaker cable, connect the guitar amp's speaker output to the

PDC22's INPUT

• Using another unshielded speaker cable, connect PDC22's PARA OUT to the input

of the guitar ampliﬁers speaker

• Connect PDC22's BALANCED OUTPUT to the input of main PA mixer.

NOTE:

This example may appear to be the same as the previous, however in this example,

the PDC22 is tapping the sound of the instruments and amp, as opposed to just the

instrument itself.

Balanced Output

(opposite panel)

Input

Amp Speaker

Output

Amplier Amp Speaker

Input

PA Mixer

Link Output

SIGNAL FLOW