Portable Power Washer User Manual PCRWASHBAT29 PyleAudio.
Portable Pressure Washer User Manual Model No. GFS-CL2 ( 43.5~145 PSI Portable Pressure Washer with Power Supply and LED Lighting) WARNING ▪ PLEASE READ CAREFULLY For your own safety and a good experience using this product, please read this manual before attempting to operate your new unit. Use this product with care and for the purpose in which it is intended. Failure to do so may cause damage and/or personal injury and will void the warranty.
Product Description Our product incorporates state-of-the-art design with high portability and the finest quality of material and workmanship. This portable washer has been designed and manufactured to give you the best and most dependable performance; if used according to these instructions and properly maintained, it will give you years of great performance. This Manual contains information for a portable, cordless pressure washer that operates 43.5~145 PSI powered by a 12V socket.
Important Information Safety Precautions Always follow these safety guidelines and warnings when using your power washer to avoid personal injury or damage to the appliance: 1. WARNING! This product is not a toy and should not be handled by infants and small children 2. WARNING! DO NOT use the washer if any part of the unit (gun, nozzle, hose, or cables) is damaged. Replace or repair using genuine (manufacturer approved) parts only. Unauthorized parts may be dangerous and will void your warranty.
KNOW YOUR PRESSURE WASHER 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Water tank Draw-bar Latch Kit Tank Cap Water Outlet Lock Panel Mesh Pocket Wheels Water Inlet Coupling Power Cord inlet socket On/Off switch Cigar lighter plug Release button Water Outlet Coupling Switch-on Torch DC Charging Input port 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32.
HOW TO OPERATE THE WHOLE SET Turn the tank cap counterclockwise to remove it Fill tank with fresh water IMPORTANT: Temperature at 0°C to 40°C WATER Replace the tank cap by turning it clockwise until secure Assemble the power bank (torch) to the pump set Assemble the pump set to the water tank Note: rotate the draw bar upward 90 degrees, push the pump set slightly down slightly while attaching it to the water tank.
Connect the spray gun to the hose Press the Switch on when you want to use the battery as the power supply Plug into car cigarette lighter socket or power port Connect the hose to the water outlet on the pump set Connect the power cord to the unit when using 12V DC. Purge air from the system and start spraying IMPORTANT: WHEN USING YOUR VEHICLE’S POWER (AC ADAPTER), DISCONNECT THE POWER CABLE WHENEVER THE ENGINE IS TURNED OFF FOR AN EXTENDED PERIOD OF TIME.
HOW TO DETACH THE PUMP SET Rotate the draw bar and lock panel upward 90 degrees. Pull the latch upward to unlock with one hand, hold the torch and pull the pump set upward to detach it from the water tank with the other hand. Press the release button down with one hand, hold the torch and pull it outward from the pump set with the other hand. HOW TO USE THE PUMP ALONE Open the plug cover, insert 12V power cord, and attach the suction hose and outlet hose to the pump set.
OPERATING THE SPRAY GUN (1) Intermittence flow The intermittence flow will occur when you pull and release the trigger repeatedly. (2) Continuos flow Position 1 Position 2 Water will continuously flow when pull the trigger forward at position 1 or position 2. (3) Variable Spray gun Twist down the nozzle head, connect the shower head / brush to the spray gun when needed. AUTOMATIC SHUTOFF THE AUTOMATIC SHUTOFF FEATURE: When the trigger is released, the dynamic pressure shuts the motor off automatically.
HOW TO OPERATE THE POWER BANK ON / OFF BUTTON Press the button once to charge the digital device. Press the button twice to access the emergency light Press and hold for 3 seconds to access illumination, in the same way to turn it off. USB OUTPUT 5V/2.0A Fuel Gauge Indicator: 4 LED: 75%-100% Capacity 3 LED: 50%-75% Capacity 2 LED: 25%-50% Capacity 1 LED: 7%-25% Capacity All LED out: 0-7% Capacity Charge you power bank with the included charger.
General Maintenance WARNING: ALWAYS DISCONNECT THE PLUG FROM THE POWER SUPPLY BEFORE ANY MAINTENANCE IS DONE OR STARTED. 1. INLET WATER FILTER: Check the inlet water filter inside the water tank before filling it with water. Clean the water filter screen if it is clogged or replace it if the screen is damaged. 2. NOZZLE CLOGGED: A clogged nozzle will cause the operating pressure to be too high causing the portable washer to surge.
Storing Your Portable Washer Your portable washer should be stored in such a way to protect it from freezing. Do not store this unit outdoors or in an area where temperatures will fall below 0°C (32°F). This can cause extensive damage to this unit and void the warranty. Water should not remain in the unit for long periods of time. Sediment or minerals can deposit on to the pump parts and affect the pumping of water.
Troubleshooting the Power Washer Problems Correction When using the car’s power with cigarette lighter, please check that power cord is attached properly and has not been damaged. Check the vehicle’s battery; in some vehicles the cigarette lighter will only have electricity when the ignition is turned on. Check the fuse of the cigarette lighter port. When using the power bank, please check that it is properly connected and charged. Check the nozzle to see if it is clogged.
Note: To avoid using up the vehicle’s power, please start the engine while you are using this product (if you plan to use it for an extended period). To protect the battery, please do not use the power bank for more than 20 minutes of continuous spraying. Technical Data: Packing List Item ● ● ● ● ● ● ● ● ● ● ● ● ● Pressure (PSI): 43.5 to 130.5 Water Flow: 2.5l/m Water Temperature: 0°C~40°C Lithium Battery: 15V 2400mAh External Power: Cigarette Lighter Volts: 12V~15V(DC) Power: 75W Hose: 6.
