User Manual

ww w.PyleUSA.com

FRONT & BACK PANEL FEATURES:

1. POWER SWITCH: Outlet switch activates protection and ltration to all outlets.

To turn the unit ON or OFF, press the upper or lower portion of this button.

2. Voltage LED Digital Screen

3. Dual USB Charge (5V/2A): Charge for Mobile-phone

4. 4 FRONT PANEL OUTLETS

5. 16 REAR PANEL OUTLETS: EMI/RFI Filtered, spike/surge protected and switched.

6. CIRCUIT BREAKER: Resettable 15 Amp thermal circuit breaker.

7. POWER CORD: Heavy duty 14-gauge power cord for connection to the

AC Power Mains (115V/60Hz).

INSTALLATION AND OPERATION

1. The Power Conditioners are the perfect accessories for any rack mount system.

Install in the top slot of a standard 19-inch rack, and the 4 Front and16 switched

AC outlets on the rear panel will provide full safety protection to al your rack

equipment. These conditioners protect your delicate electronic equipment by

combining a high voltage varistor surge and transient suppressor with an RFI/EMI

interference lter. The lter helps prevent noise from uorescent lights, motors,

and similar sources of “electronic pollution” from contaminating the AC feed to

your senitive video, audio, vtr or computer circuits.

2. Plug Power Cord (7) into a standard grounded 120V outlet.

3. Plug sensitive electronic equipment into the 8 Rear Panel Outlets (4)

4. Turn Outlet Power Switch (1) to “ON” position. Lit LED indicates conditioned

power to the connected equipment.