WARNING! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OF THIS UNIT. THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN. The lighting flash with arrow head symbol within an equilateral triangle is intended to alert the user to the presence of “DANGEROUS” voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to humans.
12. Once installation and wiring is complete power on all your equipment with the volume and level controls turned DOWN. Once all the equipment is ON slowly raise the volume or level controls to their proper positions. 13. When grounding this unit, be sure to do so correctly, so as not to defeat the built-in grounding in this unit. 14. Before placing, installing, rigging, or suspending any product, inspect all hardware, suspension, cabinets, transducers, brackets and associated equipment for damage.
REMOTE CONTROL Remote control gives you commanding access only to USB/SD, Wireless BT and FM functions and not the Master volume, microphone, bass, treble and other functions. A. Please take out the battery sheet before using the remote control, otherwise the remote control will not work. B. Press these two buttons to select the previous or next track in USB/SD or Wireless BT mode, there is no response in the FM mode. C.
7. Press this button to select the playing mode, such as USB/SD/FM/WIRELESS BT 8. EQ function: Select a pre-set mode of the equalizer that is designed accordingly. 9. Play and Pause function for MP3 in USB/SD/BT model. Press this button to auto scan the channel in FM model, and auto store channel. USB PORT The USB port is only used for playing audio files on your USB flash drive. DO NOT use it for power supply as it may damage the unit.
CONTROL PANEL BUTTON A. These buttons are only used to control the USB/SD, Wireless BT and FM functions and doesn't control other functions. B. MODE BUTTON: Press this button to select one from USB/SD mode, FM mode or Wireless BT play mode. USB/SD mode will be set automatically after turning ON the unit. Automatically plays mp3 files after inserting a USB flash drive or SD card. You cannot select AUX, CD and DVD input on this button. C.
FRONT & BACK PANEL 3 4 5 2 6 7 10 1 8 9 11 1. USB/SD Card/Wireless BT Control Console After inserting a USB flash drive/SD Card into the input terminal, be sure to set the input selector (13) to USB/SD, then press the mode button to choose between audio from the USB port, SD Card input, Wireless BT or FM radio. If you want to use the Wireless BT, check the below steps. SD Card Reader/USB Port: for using external media on this device, just plug your SD/USB into these ports. 2.
www.PyleUSA.
SPEAKER CONNECTION One or more speakers (4, 8 or 16 Ohms) can be connected to the amplifier with or without transformers. However, before you connect any speakers to the amplifier, the total impedance must be calculated in order to avoid damage to the amplifier. A total speaker impedance greater than 16 Ohms or less than 4 Ohms can cause this damage to occur. SYSTEM 1: Single Speaker System NOTE: Connect the speaker (+) to the amplifier's 4-Ohm, 8-Ohm or 16-Ohm terminal, depending on the speaker being used.
SYSTEM 4: Four Speakers in Series and Parallel NOTE: Although the description above is for connecting two series pairs of 8 Ohms speakers in a parallel hook up, you may also select to combine a series pair and a parallel pair in a parallel hook up, simply be sure you have calculated the total impedance, and attach the speaker (+) circuit wire to the proper amp terminal.
CONNECTION DIAGRAM www.PyleUSA.
Features: • Bluetooth Receiver for Wireless Audio Streaming Ability • USB/SD/FM playing • Power On/Off Switch & LED Indicator • AUX 1/MIC 1 Output Level Control • AUX 2/MIC 2 Output Level Control • AUX 3/MIC 3 Output Level Control • Bass and Treble Tone Controls • Contour Control on/off Loudness Switch • AUX RCA Output • AUX 1/AUX2/AUX 3 RCA Input • AUX/MIC Input Selector Switch • Mute Terminals • MIC 1/MIC 2/MIC 3 Terminals (MIC 1 Auto Talkover) • TEL/PAGING Terminals • Paging Output Level Control • MIC/TE
Bluetooth Wireless Connectivity: • Simple & Hassle-Free Pairing Ability • Works with All of Today’s Latest Devices (Smartphones, Tablets, Laptops, Computers, etc.) • Bluetooth Network Name: ‘Pyle Speaker’ • Bluetooth Version:5.0 • Wireless Range: 40’+ ft.
Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.
