PBMSPG1BK Bluetooth BoomBox Speaker System Wireless & Portable Radio Speaker with FM Radio, MP3/USB/Micro SD Readers
Please take the time to read this manual carefully before you begin using your new device. Any content revision of the manual won't declare again, and we are not responsible for consequence caused by fault or oversight of this manual.
Wireless BT Streaming: 1. Turn the power button to “ON”, then you will hear a “Bluetooth Device Ready To Pair” tone. The LED light blinks quickly. The speaker is now in pairing mode. 2. Activate Wireless BT of your mobile phone and search for the device name “PyleUSA” then connect it. Once paired successfully, the Blue LED will blink slowly, and you will hear a tone “Bluetooth Device Connected Successfully” once connected. 3. Play the music from your mobile phone and enjoy. 4.
TWS Function: 1. Turn ON two identical speakers you want to pair, please be noted that they must have the same BT paring name, both under BT mode. You only need to set up one of the two units; 2. Press and hold “PLAY/PAUSE” button for around 4 seconds, speaker will make a tone “di” to start pairing, and will make “di” voice for 3 times once successfully paired; 3. Connect Wireless BT with your mobile phone to play music by the two paired Speakers to create more powerful surround sound effect. 4.
How to charge: 1. The charger is not included in the accessories. Please use the Universal 5V/1A charger to charge this device, and we are not responsible for any damage caused by using other charger. 2. Power off the unit, put the provided charge cable into the charge slot of unit, connect the other end to your PC or other charger with 5V output. 3. Charging time should be 3-5 hours. The light is red while charging, and the indicator light will switch off when fully charged.
Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.
