PBMSPG122 Wireless BT Portable Speaker Radio System
Please take the time to read this manual carefully before you begin using your new device. Any content revision of the manual won't declare again, and we are not responsible for consequence caused by fault or oversight of this manual.
1.On/Off / Volume /EQ Knob 2.USB Port 3. LED Display 4.Microphone Socket 5.Guitar Socket 6.Mic Volume Knob 7.Aux-In Socket 8. Mode (Wireless BT, USB disk, FM and AUX-In Mode) 9. Previous Track and Rewind 10. Play/Pause 11. Next track and Fast Forward 12. Charging Socket Music playing: 1. Press and hold Power button for 2-3 seconds to turn the speaker “ON” 2. Plug the USB disk into the USB socket. The audio files on the USB stick will start to play automatically. 3.
FM Radio: 1. Under FM radio state, the audio cable provided is the antenna. Please insert the audio cable to get the best FM signal before using. 2. Turn the power button to “ON” without USB Card inserted. Then press the “MODE” button to switch to FM. (The order of the mode is Wireless BT, USB, FM and AUX-IN) 3. Under playing mode, short press “Play/pause” button to auto search the FM Channel and store it automatically. 4. Press PREV or NEXT button to change the stored FM channel.
How to charge: 1. The charger is not included in the accessories. Please use the universal 5V/1A charger to charge this device. Put the provided charging cable into the charging jack, connect the other end to the charger, the charging indicator beside the LED screen will keep blinking. (When playing music during charging, please put the volume to middle, because for some music with heavy bass, the charger may can not afford the high current temporarily under the maximum volume) 2.
