Please read all instructions before use for the best performance of this product. Save these instructions for future reference. Box Contents MUTE VOL+ VOLBT OPT INPUT COAX LINE MOVIE Bookshelf Speaker MUSIC DIALOG Remote Control Quick Start RCA to RCA audio cable Stereo RCA to 3.5mm audio cable Digital Optical cable Power Adapter LED Indicators and Button Introduction Active Speaker Infrared receiver LED Indicators 2 www.PyleUSA.
01. Power switch 02. Input selection 01 02 03 EQ 04 LINE IN VOLUME 05 L 06 TREB R 10 OPT COAX 07 09 SPEAKER OUT BASS 11 DC IN 08 Active Speaker Product Name: Bookshelf Speaker Model: PBKSR40WT Input Voltage: DC 18-22V Power Consumption: 80W SPEAKER IN 12 Passive Speaker Press in to navigate between audio sources: BT -> Optical -> Coaxial -> LINE IN 03. Sound effects Press in to navigate between audio sources: Music -> Dialogue -> Movie 04. Volume control 05. Treble control 06.
Connection Diagram TV BT Device c a BT signal up to 30 feet EQ Product Name: Bookshelf Speaker b L TREB COAX BASS DC IN Model: PBKSR40WT d LINE IN Input Voltage: DC 18-22V Power Consumption: 80W R OPT e SPEAKER OUT Active Speaker SPEAKER IN Passive Speaker f a Digital Optical cable (supplied) c BT e RCA to RCA audio cable (supplied) 4 www.PyleUSA.com d b Coaxial cable (not supplied) Stereo RCA to 3.
Connecting with a TV Active Speaker C A Optical digital cable (supplied) B RCA to 3.5mm audio cable (supplied) Coaxial cable (not supplied) TV A Method 1. Connecting using an Optical cable. Select Optical mode and set the TV’s audio output to “PCM”. (More information on PCM page) B Method 2. Connecting using a RCA to 3.5mm cable. Select RCA mode. C Method 3. Connecting using an Coaxial cable. Select Coaxial mode and set the TV’s audio output to “PCM”.
1. Press "Menu" on the TV’s remote control. 2. Press the arrow keys on the remote to scroll to "Audio Settings." 3. Press "OK" on the remote control. 4. Scroll to "Advanced Audio" and press "OK". Some televisions may not have an"Advanced Audio" menu and may list various audio settings instead. 5. Scroll to "Audio Output Mode" or "Digital Audio Output Mode" and press "OK". 6. Scroll until "PCM" is displayed as the current audio output. 7. Press "OK" to save the settings.
Troubleshooting No sound • Check if the power indicator light is ON. • Try to turn up the volume using either the master volume control or remote control. • Ensure the audio cables are firmly connected and the input is set correctly on the speakers. • Check if there is signal output from the audio source. Cannot connect via Wireless BT • Make sure the speaker is switched to BT input, in other audio input mode BT can not be paired or connected.
Questions? Comments? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.
