User Manual

www.PyleUSA.com 3
PRECAUTIONS WHEN USING THE USB 2.0 AND 5V DC TERMINALS
Precautions When Using the USB 2.0 and 5V DC Terminals. When connecting
the USB 2.0 connector to computer, please must abide following points. If not,
it may cause computer crash, breakdown or losing data. If the computer or
mixer crash, rstly restart the application software or computer operating
system or disconnect the mixer, then power on again.
• Use an AB type USB cable. USB 3.0 cable cannot be used.
• Before connecting the computer to the USB 2.0 terminal, exit from any power-
saving mode of the computer (such as suspend, sleep, standby).
CONTROLS AND FUNCTIONS for PAD12MXUBT - PAD22MXUBT
1
2
3
5
20
22
16
14
4
6 7 8
11
12
13
19
1. [MIC/LINE & GUITAR] Input
jack, this combo jack can be
used to connect the mono
signal such as XLR microphone
or 1/4” line input device, or
connect with an instrument
such as an electric guitar or
an electric bass, they need to
be converted with SWITCH .
2. [MIC/LINE & GUITAR]
Converting switch, for conver-
ting the different input source.
Press down this switch to
connect with a high impe-
dance audio source, such as
electric guitar or bass. When
the switch is bounced up, it
connects with XLR microphone
or 1/4” low impedance audio
device.