Specifications

155
• 3” Titanium Super Tweeter
• Die Cast Aluminum Frame
• 1200 Watts Max./ 4~8 Ohm
• Freq. Resp: 2000-25,000 Hz
• Sensitivity: 114 dB/ w/ m
• Crossover Capacitor Included
• 5” Diameter/ 2” Mounting Depth
3 Heavy Duty Aluminum Die-Cast Titanium Super Tweeter
PDBT68
• Die Cast Aluminum Frame
• Diamond Chrome Cutting Finish
• 2 High Temperature Kapton Voice Coil
• 20oz Magnet Structure
• 350 Watts RMS/700 Watts Peak
• 4-8 Ohms Impedance
• Sensitivity: 112 dB/W/M
• Frequency Response: 2kHz - 25kHz
• Mylar Crossover Capacitor Included
• Dimensions: 4 x 5 / 3 Mounting Depth
2 Titanium Super Tweeter
PDBT78
Tweeter
• Material: ABS Resin
• Nominal Coverage Angle (HxV)-6 dB:90°x40°
• Cut Off Frequency: 1000 Hz
• Throat Diameter: 26mm
• Mounting Type: Zinc Screw Insert 1 3/8- 18 UNEF
• Dimensions: 11.6”H x 11.6”W x 9.8”D
Screw-On Type Constant Radiation Horn
PH12S
• Material: ABS Glass Fiber
• Nominal Coverage Angle (HxV)-6 dB: 90-ba x 40-ba
• Cut Off Frequency: 800 Hz
• Throat Diameter: 25.40mm (1)
• Mounting Flange Diameter: 76mm
• Mounting Hole Diameter: 5.6mm
• Dimensions: 7 7/8H x 12 1/2W x 10D
Screw-On Type Constant Directivity Horn
PH515
• Material: ABS Resin
• Nominal Coverage Angle (HxV)-6 dB:90°x40°
• Cut Off Frequency: 1000 Hz
• Throat Diameter: 26mm
• Mounting Type: Zinc Screw Insert 1 3/8- 18 UNEF
• Dimensions: 6.4”h x 11.9”w x 4.4”d
Screw-On Type Constant Radiation Horn
PH612
• Material: ABS Resin
• Nominal Coverage Angle (HxV)-6 dB:90°x40°
• Cut Off Frequency: 1000 Hz
• Throat Diameter: 26mm
• Mounting Type: Zinc Screw Insert 1 3/8 - 18 UNEF
• Dimensions: 6.25”h x 16.5”w x 8.65”d
Screw-On Type Constant Radiation Horn
PH714