Specifications

154
• 2 Titanium Super Tweeter
• Die Cast Aluminum Fram
• Crossover Capacitor Included
• 40oz Magnet Structure
• 300 Watts RMS/600 Watts Peak
• Sensitivity:106 dB/w/m
• Impedance:4-8 Ohm
• Freq.Resp.:2,000HZ-25,000HZ
2 Titanium Super Tweeter
PDBT49
• Die Cast Plastic Frame
• 150 Watts RMS/300 Watts Max
• 4 Ohm Impedance
• Frequency Response: 2.5 KHz-20 KHz
• Sensitivity: 100 dB/w/m
• Number of bolt holes: 4
• Bolt hole dimension: F5mm (4—)
• Diameter: F91mm
• Mounting depth: 55.5mm
• Total depth: 61 mm
1 Die-Cast Titanium Super Tweeter
PDBT53
• 3 Titanium Super Tweeter
• Die-Cast Aluminum Frame
• Diamond Chrome Cutting Finish
• 3 High Temperature Kapton Voice Coil
• 100 oz Magnet Structure
• 500 Watts RMS/1000 Watts Peak
• 4-8 Ohms Impedance
• Ferro Fluid Enhanced Voice Coil
• Sensitivity: 109dB
• Frequency Response: 2kHz - 25kHz
• Mylar Crossover Capacitor Included
• 5 Diameter - 2 Mounting Depth
3 Extra Heavy Duty Titanium Super Bullet Tweeter
PDBT58
• Diaphragm Material: Titanium
• Voice Coil Size: 1.75(44.4mm)
• Impedance: 4 Ohm
• Sensitivity: 102db/W/M
• Frequency Response: 2-20 kHz
• Rated Power Input (RMS): 500w
• MAX Power Handling: 1000w
• Magnet Weight/Type: 16 Oz Ferrite Magnet
• Bafe Material: ABS + PSF
1.75 Aluminum Housing Super Bullet Tweeter with Titanium Voice Coil
PDBT59
• Die Cast Plastic Frame
• 360 Watts RMS/720 Watts Max
• 4 Ohm Impedance
• Power: 40W
• Frequency Response: 2 KHz-25 KHz
• Sensitivity: 105 dB/w/m
• Number of bolt holes: 4
• Bolt hole dimension: 4.5mm—6mm(4—)
• Diameter: F124.5mm
• Mounting depth: 83mm
• Total depth: 91 mm
1.8 Die-Cast cloth Super Tweeter
PDBT63
Tweeter