Specifications

98
• 2550 Watts x 2 Power Amplier 1275 Watts x 2 RMS
• 600 + 600 Watts @ 8 Ohms
• 1200 +1200 Watts @ 4 Ohms
• 2400 + 24000 Watts @ 2 Ohms
• Protection Indicator
• Dual 1/ and Dual RCA Inputs
• Outputs: Dual Speakon / 1/4 /Banana Plugs Speaker
Outputs
• Dual Output Level Controls and Illumination
• High Quality Ring Transformer
• Soft Start limiter
• Power On / Off Switch
• Stereo Mono Parallel Selector
• Stereo Power into 4 Or 8 Ohms
• Led Display
• Ground lift Switch
• Heavy Duty Fan Cooling Aluminum Heatsing
• 115/230 Voltage Selector
• Dimensions: 5.75H x 19W x 14.37D
19 Rack Mount 5100 Watts Professional Power Amplifier W/Digital SMT Technology
PQA5100
• Independent Volume Control For Each Channel
• Power Output: 100W X 2 RMS (8 Ohms)
• Power Output: 200W X 2 RMS (4 Ohms)
• Power Output: 400W (Bridge, 8 Ohms)
• Power Output: 2000W Max Peak
• Total Harmonic Distortion: Less Than 0.1%
• Input Sensitivity & Impedance: 0.775V RMS, 10K
Ohms
• Signal-To-Noise Ratio: More Then 100dB
• Frequency Response: +/-0.5dB, 20Hz-20 KHz
• Balanced XLR And ¼ €œTRS Inputs
• High Speed Cooling Fan
• Lowest Noise -Smooth Operation
• Signal And Clip Led Indicators For Protection And
Performance
• Binding Post Speaker Terminals
• Thermal And Overload Protection
• Power Supply: 115V-60Hz / 230V-50Hz (Switchable)
1U Rack Mount 2000 Watts Power Stereo Amplifier
PSA2000
• Two Channels A/B- Bridgeable
• Inputs: Electronic Balanced; Barrier Strip ,XLR,TRS
1/4
• Speaker Terminal: Speakons for Ch A, Ch B and
Bridge; Binding post
• Cooling Fan Two-speed DC fan, air Flow back to front
• 110/220 Volt Switchable
• 2x5 LED Indicator Red ,DDT / Clipping; Yellow, signal;
Green ,power
• Overload and Protection Indicator
• Signal/Noise ratio: =102dB
• Distortion: =1.0%
• Frequency response: 20Hz-20 KHz >±0.5dB
• input impedance: balance 20Khz
• Input level:+4dB
• Total Power 1000 Watts
1000 Watts Professional Power Amplifiers
PTA1000
• Two Channels A/B- Bridgeable
• Inputs: Electronic Balanced; Barrier Strip ,XLR,TRS
1/4
• Speaker Terminal: Speakons for Ch A, Ch B and
Bridge; Binding post
• Cooling Fan Two-speed DC fan, air Flow back to front
• 110/220 Volt Switchable
• 2x5 LED Indicator Red ,DDT / Clipping; Yellow, signal;
Green ,power
• Overload and Protection Indicator
• Signal/Noise ratio: = 102dB
• Distortion: = 1.0%
• Frequency response: 20Hz-20 KHz >± 0.5dB
• input impedance: balance 20Khz
• Input level:+4dB
• Max Power 1200 Watts
1200 Watts Professional Power Amplifier
PTA1200
• Two Channels A/B- Bridgeable
• Inputs: Electronic Balanced; Barrier Strip ,XLR,TRS
1/4
• Speaker Terminal: Speakons for Ch A, Ch B and
Bridge; Binding post
• Cooling Fan Two -speed DC fan, air Flow back to front
• 110/220 Volt Switchable
• 2x5 LED Indicator Red ,DDT / Clipping; Yellow, signal;
Green ,power
• Overload and Protection Indicator
• Signal/Noise ratio: =102dB
• Distortion: =1.0%
• Frequency response: 20Hz-20 KHz >±0.5dB
• input impedance: balance 20Khz
• Input level:+4dB
• Total Power 1400 Watts
1400 Watts Professional Power Amplifiers
PTA1400
Ampliers