Instruction Manual

Page 2
These outdoor speakers are manufactured to resist a variety of weather conditions. Snow,
rain and sun (not to be submerged under water). For durability / longevity we do recommend
removing the speakers from the brackets and placing inside during extended extreme
temperatures over 120 degrees Fahrenheit and below 0 degrees Fahrenheit. The most ideal
place to install these speakers is under the overhangs as they provide the best protection. Like
all speakers, they sound the best when placed no more than eight feet apart from each other,
and slightly higher than ear level. When choosing the speaker location - consider the location
of the power source. The Active Speaker should be placed near the power source. The Passive
Speaker could be placed further away and should be connected to the Active Speaker.
Installation
If your application requires the speaker to be mounted, please follow these directions.
1. Using the appropriate screws mount the bracket. (Fig.1)
2. Attach the speakers to the brackets using the large plastic knobs supplied.(Fig.2 & 3)
Screw the bracket knobs into the cabinet. Point the speaker toward the listening area. Once
the direction of the speaker has been determined tighten the bracket knobs securely.
Knob
1 2 3
Connection
100-240V AC
ON/OFF
Knob
Active Speaker Passive Speaker
Audio Device