User Manual

www.PyleUSA.com
BLUETOOTH
Bluetooth app allows Bluetooth pairing with compatible devices for making calls and music playback. To pair your
phone, ensure Bluetooth is enabled in your phones system settings and that you are disconnected from all other
devices.
In the Bluetooth app of your radio, press the “Gear” icon in the left column to access Bluetooth settings. Next, press
the “Magnifying glass” icon to set the radio into pair mode. The radio will then display searching” and show all
nearby compatible Bluetooth devices:
Select your phone from the list, and tap a second time to initiate pairing.
Your phone should now display a pin pad where you will enter “0000”
Check that device named “CAR_KITT shows as connected on your phone.
Note: Once your phone is paired, you can use the other functions within the radios Bluetooth app.
Left hand column:
• Select the “Keypad” icon to dial out using the radios number pad
• Select the address book” icon to display your phones contact list. You will need to import your contact list using
the download icon located in the right column of the Bluetooth app.
• Select the “phone icon to see a log of incoming and outgoing calls
• Select the gear icon for phone pairing and selection options
• Select the “headphones” icon for music playback controls
Right hand column:
Trash delete currently selected entry
“Download” Use to download contact data to address book
“Speaker selection Switch between car speaker/mic and phone speaker/mic
“ ” Press this function icon for search/disconnect/connect/delete
15