User’s Manual PLDNANDVR695 Android Stereo Receiver & Dual Camera System HD DVR Dash Cam, Rearview Backup Camera, 7'' Touchscreen Display, Wi-Fi Web Browsing, App Download, GPS Navigation, Bluetooth Streaming, HD 1080p Support, Double DIN
Note: This unit is based on Android 4.4.4 platform. Besides the standard Apps we provided with the unit, you can also download thousands of Apps and install it on our platform. Please kindly note NOT all Apps are compatible with this platform. If you have any compatibility problem with a 3rd party App, please contact your App provider. For the operation instruction of a certain 3rd party App, please also contact your App provider. We are not responsible for any problem with your 3rd party Apps.
COMPATIBILITY This unit is a standard “Double Din” sized radio. Check to see that your vehicle accepts a double din sized radio. This unit conforms to the standard size and dimensions of a double din radio. Your vehicle may require a vehicle specific or 3rd. party double din installation kit. PRECAUTIONS & WARNINGS Please take a moment to read through this information booklet and heed all precautions to ensure a positive user experience.
SYSTEM INSTALLATION: Before starting: To prevent short circuits, be sure to disconnect the battery terminal before starting. Installation Guide - Double Din Fitting: Caution: 1. This screen opens up. Install the unit within 30 degrees of the horizontal plane. Check that the screen has enough room to fully open. Restricting screen movement will cause damage to the mechanism. 2. Consult your vehicle dealership before making any modifications to your car’s body (ex. Drilling holes) 3.
INSTALLING STEERING WHEEL CONTROL Note on Compatibility: This unit is a dual wire code learning Steering wheel interface, adaptable to any vehicle with existing steering wheel controls. This unit has the ability to wire directly to your vehicle’s steering wheel column and does not, but may, require a 3 party steering wheel control interface. Pyle Audio Technical support can assist you in interfacing into vehicles with existing steering wheel controls.
FRONT PANEL AND BUTTONS Buon & Feature Layout Mic Microphone port Power/Mute Hold to power up / shut down unit. Short press while unit is on to mute the volume output Switch between apps/radio interface, Press while in GPS interface to return to radio apps Home Press to load GPS software from SD map card Navi VOLVolume down VOL+ Volume up ˄ Position screen tilt upward Position screen tilt upward ˅/Eject Hold to open screen and eject disk. RES Use a pin to insert into reset port to trigger unit reset.
APP SCREEN-INTERFACE LAYOUT Swipe left/right to access more apps Navigation Radio All Apps list BT Settings Navi Loads Navigation software (if you have several maps in this device, you can set the default map. Setting Car setting Navi setting.
SETTINGS 1. Scrolling Use the red bar to scroll through the list of all available options. 2. Turn on/off Many settings can be toggled on or off in this screen *Note: Factory setup is not adjustable by user. Do not attempt to enter this setup menu. SET TIME 1. Time Options You can select using GPS to provide positioning time or using net work-provided time. 2. Date and Time Use the up and down arrows to set the date and time accordingly. 3. Select time zone accordingly. SOUND 1.
CALENDAR • Displays the day, month and year. • Use forward and back arrows the view past or future months. • Selected dates are highlighted in blue Note: Calendar does not allow entry of appointments. Date must be set within system settings CALCULATOR • A handy little app for simple calculations EQ - EQUALIZER Presets Select one to automatically adjust the equalizer Adjustments Hold and drag up or down to manually adjust the EQ by each frequency band 8 www.PyleUSA.
RADIO 1. Scanning: Press, hold, and drag the slider to quickly tune the radio. 2. Current Station: The currently selected station will be displayed in the center. Press the forward and back arrows to change the current station. 3. Favorite Stations: Press and hold one of the six preset slots to set and save a selection for later. 1 2 3 SD - FLASH MEMORY FILE BROWSING Warning: Do not attempt to browse files while operating the vehicle 1. Browsing Files • File location is displayed.
THIRD PARTY APPS For the detailed operation instruction for a certain 3rd party App, such as Google map, Youtube etc., please contact your 3rd party App provider for further service. Thank you. TROUBLE SHOOTING Q: Unit doesn’t power up A: Use a multi-meter to check for 12v+ to red and yellow wires. Check for proper Ground on the Black wire. Q: My video does not play A: Attach “PARK” wire to parking break.
TROUBLE SHOOTING Q: How do I use / set-up RDS? A: (*Traffic and weather feature only available in Europe) Q: My Bluetooth microphone is not working as expected A: - Check that nothing is covering microphone port.
WIRING - BACK PANEL WIFI ANTENNA 3G/USB/DVR 3G/USB/DVR 3G/USB/DVR BT/MIC SUBWOOFER OUTPUT GPS ANT RADIO ANT A. Video Input B. Video Output 1 C. Video Output 2 D. Left Audio Input E. Front Left Audio Output F. Rear Left Audio Output G. Right Audio Input H. Front Right Audio Output I. Rear Right Audio Output 12 www.PyleUSA.
WIRING - COLOR WIRING GROUND BACK UP CAMERA Radio Antenna Green/White Blue/White Orange Brown Pink Blue Gray/White Black (RCA) Red Yellow Black Orange Brown Purple Green Gray White Subwoofer Output Audio / Video Input Audio / Video Output 1 Audio / Video Output 2 SW KEY AMP REMOTE TURN ON ILLUMINATION BACK UP CAMERA PARKING AUTO ANTENNA SW-GROUND CAM VIDEO IN ACC FUSE/ POWER B+ GROUND CANBUS INTERFACE CANBUS INTERFACE Speaker Rear R Speaker Rear L Speaker Front R Speaker Front L Radio antenna receptacl
DVD DVD app will only open if a compatible DVD disc is detected. 1. Scrubbing Press and drag along the time line to quickly skip through DVD times line. (Note: DVD formatting does not allow scrubbing through previews and warnings) 2. Menu Options & Controls: Subtitle switch Root menu Fast Backward Random Play Play previous channel Repeat all Play / Pause Play list Stop the DVD Number Play next channel Angle Fast Forward Turn subtitles on/off Submenu Audio 1 2 2 2 14 www.PyleUSA.
BLUETOOTH Bluetooth app allows Bluetooth pairing with compatible devices for making calls and music playback. To pair your phone, ensure Bluetooth is enabled in your phone’s system settings and that you are disconnected from all other devices. In the Bluetooth app of your radio, press the “Gear” icon in the left column to access Bluetooth settings. Next, press the “Magnifying glass” icon to set the radio into pair mode.
HOW TO ACCESS INTERNET How to access internet? You have three ways to access internet. 1. Use a 3G dongle Insert USB type 3G dongle to one of the rear USB port, wait for few seconds, then 3G signal icon will be shown on status bar, and you can access internet now. 2. Use your smartphone as hotspot Please turn on your smartphone hotspot, then go to this car Android unit and turn on wifi, find out your smartphone hotspot and connect it, now you can access internet. 3.
Output Setup Auto Segmentation: The video file recorded should not be too large, otherwise it will increase memory consumption when opening file which may cause playback failure. When you choose high-resolution, the video file recorded will be larger, so it may be appropriate to shorten the split time. Auto Delete Old Video: When there is not enough free space in the storage, it will automatically delete the oldest recorded video to clear space for newly recorded video.
INSTALLATION DVD MIC /MUTE HOME NAVI VOL- VOL+ RES IR or or 18 www.PyleUSA.
REAR VIEW BACKUP CAMERA INSTALLATION: Please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as guidelines to assist in installing the system. Please consult an experienced technician if you are not comfortable installing the product.
System Installation and Wiring Note: Camera System installation on diesel vehicles may require a slightly different wiring install. Caution: Connecting to other types of electrical systems will cause damage to your vehicle. Please contact the manufacturer if you are unaware of the system type in your vehicle. Refer to the model's power requirements prior to connection and installation. QUICK INSTALLATION: This rearview backup camera system comes with camera and installation wiring.
Angle Adjustable Camera Lens • Located on the camera housing are 2 screws which lock the camera lens angle in position. • The screws may be loosened to allow camera lens angle adjustment • Loosen the screws, adjust the camera lens into the desired angle. then tighten the screws securely. • Be sure as to not overtighten the screws. 21 www.PyleUSA.
PHONE LINK SOFTWARE This phone link software is developed by a 3rd party Apps developer, which we provided to our valued customers free of charge. As mobile phones manufacturers are keeping on upgrading their system, this device may not be compatible with their upgraded operating system, we will not be responsible for these incompatibility. 1. Product Introduction Easyconnected is a software product which is developed by Wuhan Carbit Information Co., Ltd.
3.3.Transmit mobile phone sound to vehicle navigator Transmit the sound to the vehicle navigator to facilitate receiving and making a call. At the same time, the mobile phone audio can be transmitted to the vehicle terminal through A2DP protocol, and is played by the car loudspeaker. The bluetooth connection between the mobile phone and vehicle navigator shall be accomplished before using Easyconnected for the irst time.
Remarks: Wi-Fi connection to IOS mobile phone only supports reverse control in Drivemode client . The performance of Wi-Fi connection to Android mobile phone and IOS mobile phone is related to the wireless signal strength. 5.2.Connection Manner 5.2.1.
Allow to install Phone Link service and Drivemode software on the mobile phone according to the prompts (not required to confirm on some mobile phones). 5.2.2.Android Wi-Fi Connection Enable the network share and portable hotspot function of mobile phone, record the name of mobile phone hotspot, and use the mobile phone Wi-Fi as hotspot for vehicle navigator connection. 25 www.PyleUSA.
Select the mobile phone hotspot enabled just now from the box on the left side, and enter a password for connection. Enter connection authentication by USB connection manner for mobile phone connection for the first time or after mobile phone restart to ensure the connection security. Refer to [Android USB Connection]. Enter the welcome interface of Drivemode successfully, which means successful connection. 26 www.PyleUSA.
5.2.3. IOS Wi-Fi Connection Enable the personal hotspot function of mobile phone, record the name of mobile phone hotspot , and use the mobile phone Wi-Fi as hotspot for vehicle navigator connection. Slide on the screen of mobile phone to open the control bar, click Airplay to select EC-Mirror-**, and then enable mirror switch. Open Drvie mode APP on the phone, if don't have, you can scan QR code and download. 27 www.PyleUSA.
5.3.
7. FAQ 7.1. How to enable USB debugging switch of Android mobile phone The method for enabling [USB debugging switch] will be different for different versions of Android system. Please select the connection wizard according to the system version of mobile phone to operate on the phone in sequence. 29 www.PyleUSA.
7.2. Checklist of Connection Problems Mobile phone type Android mobile phone iPhone mobile phone Problem Cause analysis Solution USB Debugging icon does not appear on the mobile phone screen Physical USB connection fails. 1. Check whether the mobile phone has enabled [USB Debugging mode] 2. Check and replace USB cable 3. Check the USB interface of vehicle navigator 4.
