User’s Manual PL1SN104 Adjustable Viewing Angle (Maximum Angle 360°) 10.
1 Precautions 2 Wiring Diagram 3 General Operation 5 AM/FM Tuner Operation 6 Multimedia player 7 Music playing interface 7 Viedo or Picture playing interface 7 AUX in/ Rearview Camera 7 Wireless BT Streaming 8 AutoLink Software (Phone Link) 9 Setting Menu 11 Troubleshooting 12 Systematic Parameter 14 Disassembly Steps of Display 15 Rear View Backup Camera Installation 16 www.PyleUSA.
Precautions 1. When the interior of the car is extremely cold and the unit is used soon after switching on the heater, moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation. 2.
Wiring-Back Panel: 3 www.PyleUSA.
Wiring-Color Wiring: www.PyleUSA.
General Operation: 1 2 4 5 Profile of main interface 1.Time Setting 2. Radio 3. Bluetooth 4. USB 5. SD Card 6. Navigation (optional) 3 6 7 10 8 11 9 12 7. Steering Wheel Control Setting 8. EQ 9. Wallpaper 10. AUX 11. AutoLink 12. Settings Note: If there is no any device connection, icons for USB, SD will be showed no device. Click is invalid in this case. Display setting is invalid if there is no audio or video playing.
Car logo • Preset car logo to match your car brand Steering wheel control • Set the function button on you steering wheel via the system learning setting AUX Input • Connect an optional audio video source to the Aux input AM/FM Tuner Operation Radio interface RDS turn on function Touch Radio icon in main interface to switch to radio mode.
1.Click the icon to enter the playlist EQ Select Previous Program / Title / Song Play / Pause Select Next Program / Title / Song Volume Title Menu Selection Video or Picture playing interface Note: Sliding the controlling bar in the bottom to show the next page. AUX in (Auxiliary device input) Click in from the main interface SRC key in remote control to switch to AUX in Mode.
Wireless BT Streaming Dialing Call records Phone BT Phone Phone book Phone Book BT Music EQ Setup Bluetooth music EQ Settings Wireless BT Music The phone must support A2DP agreement. Press BT Music icon in the main interface. Under the connected mode, click play keys in Wireless BT interface to play different music formats restored in the phone. Due to different types of phones, music can be played either by choosing music player on the phone or click the play key in the Wireless BT interface.
AutoLink Software(Phone Link) AutoLink connects your device to your Android mobile phone and iPhone through the standard USB port and transfer the picture and sound from the phone to the device. You can control the phone through the device's screen , such as receiving calls, dialing calls, listening to music, watching movies or photos. Connect your ANDROID phone or iPhone to the unit with original USB cable, touch the AutoLink icon,open the menu,then follow the instructions. AutoLink 9 www.PyleUSA.
AutoLink AutoLink www.PyleUSA.
Setting System Setting Disc Setting Time& Date Setting Vsurround Setting Frames Adjust Setting Panel Setting Ledcolor Setting Version Setting 11 www.PyleUSA.
Wheel Set Setting Connect the steering wheel control cable, and click the corresponding key to activate the function. After entering into the steering wheel control interface, then keep pressing the steering wheel “VOL+” button in your car, at the same time click “ ”in the interface, it will be selected, then it is finish this setting. Click other buttons according this method, the steering wheel function can be used.
Turnover screen Turnover screen Auto Open of turnover screen setting does not open is OFF. automatically. Connection of brake wire is not correct; No image Not brake state Auto Open»ON Connect brake wire with cathode of power supply correctly; Keep brake state after car is placed safe. Unstable output DVD does not correspond with the present Adjust system video setting; system video setting; of images Check and make sure of the Video signal line is not connected correctly. connectivity.
Systematic Parameter Specifications • Working voltage: Direct current 12V • Working voltage range: 10.8V-16V • Maximum working electronic current: 10A • Installation angle: less than 30 degree tilted the front side and backside Device USB/SD Type(•*) • MP3 • WMA • JPEG (1080x920) • AVI • RMVB • MPG • DAT FM Radio • Frequency modulation: 87.5 MHz ~108.
Disassembly Steps of Display 1. Pull the two clips(A&B) on the back of the display to both sides. 2. Remove the display. 3. Press the clips toward the center and unplug the cable. 4. Disassembly completed. 15 www.PyleUSA.
Rear View Backup Camera Installation Please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as guidelines to assist in installing the system. Please consult an experienced technician if you are not comfortable installing the product.
System Installation and Wiring Note: Camera System installation on diesel vehicles may require a slightly different wiring install. Caution: Connecting to other types of electrical systems will cause damage to your vehicle. Please contact the manufacturer if you are unaware of the system type in your vehicle. Refer to the model's power requirements prior to connection and installation. QUICK INSTALLATION: This rearview backup camera system comes with camera and installation wiring.
Angle Adjustable Camera Lens • Located on the camera housing are 2 screws which lock the camera lens angle in position. • The screws may be loosened to allow camera lens angle adjustment • Loosen the screws, adjust the camera lens into the desired angle. then tighten the screws securely. • Be sure as to not overtighten the screws. Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.com www.PyleUSA.