Owners manual

I) Copying 1 track (assume copy from SD card to USB mode)
1. Perform normal playback of the track at SD/MMC card you want to copy,
2. Press “ Record “ button (9) during the playback of the desire track, unit will display “
“ & “
“ and flashing. Copying is performing now.
3. After copying is completed, unit will stop playback automatically.
II) Copying all tracks (assume copy from SD card to USB mode)
1. Select “ SD “ mode and then insert the S/MMC card you want to copy.
2. After reading of card information is completed, press the “ Record “ button (9) and the unit will display
“
“ & “ “ and flashing. Copying is performing now.
3. After copying is completed, unit will stop automatically.
E) Encoding bitrate (by remote handset)
You can select the desired bitrate during encoding, the higher bit rate will generate better sound quality
and occupy more space of memory. The selectable range is from 32 / 64 /96 /128 / 192 / 256 kbps
respectively
1. Set in “ Phono “ function (3) & remain stop mode.
2. Press the “Info “ button at remote handset and the LCD display (2) will show the default bitrate (128
kbps)
3. Press skip
or buttons (16,17) to select the desire bitrate for encoding.
4. Press again the “ info “ to confirm the setting and the LCD display (2) will resume to phono mode
F) Track separation (by remote handset)
You can divide the recording music from Phono or Tape to USB/SD track by trace during encoding. Every
time when press the “
“ (track separation) button once at remote handset during encoding from
Phono or Tape to USB/SD, the system will generate a new track and continuous the recording. The text
“ PHONO “ or “ TAPE “ at LCD display (2) will flashing one time, it mean the unit is creating a new track
successfully.
File delete at USB / SD card (by remote control)
The system is able to erase the file stored inside the USB pen drive or SD/MMC card by following:-
A) Single file delete
1． Select at “ USB “ or “ SD “ mode.
2． Press and hold the “ Info “ button for 3 seconds and the LCD display (2) will show (del ---001)
3． Press skip forward
or skip backward button to select the file going to delete
4． Press the “ Rec
“ button to enter “ YES / NO “ mode and then press Skip forward or Skip
backward
to select “ YES “ or “ NO “.
5． Press the “ Rec
“ button again to confirm the setting.
B) All files delete (by remote control)
1. Select at “ USB “ or “ SD “ mode.
2. Press and hold the “ Info “ button for 3 seconds and the LCD display (2) will show (del ---001)
3. Press and hold the “ Info “ button again and the LCD will show “ FORMAT / Y/N “ and flashing. Then
press Skip forward
or Skip backward to select “ Y (yes) “ or “ N (no) “.
4. Press the “ Rec
“ button again to confirm the setting.
Remark :
- All the files inside the USB storage media or SD card will be deleted completely after confirming to “ Y
(yes) “ mode.
- Press “ Stop “ button once at remote handset to quite delete mode
Removing of USB / memory card
To remove the USB / memory card, turn off the power or switch the function mode to either CD, Tape or
Tuner first. For USB port – un-plug it by pulling out the USB socket directly, for memory card – press the
memory card inward & then release, now the card being partially eject and you can remove it by hand.
x-bass sound effect
Press the x-bass button (8) to active x-bass function and enhance the bass effect at “ on
“ position.
E-7