User's Manual

ManualsBrandsPyle Pro ManualsDJ EquipmentPortable 60W Rechargeable PA Speaker with Bluetooth and Wireless Microphone

PARTS DESCRIPTION

1. Power ON/OFF switch

2. MP3 volume control

3. Power ON LED indicator

4. RF ON LED indicator

5. External DC input jack

6. Wireless mic receiver antenna

7. Charge LED indicator

8. Echo level control

9. Bass level control

10. Treble level control

11. Record out jack

12. MIC Input jack

13. Wired/wireless MIC volume control

14. MP3 display

15. MP3 mode

16. MP3 previous/volume-

17. MP3 next/volume+

18. MP3 play/pause

19. USB port

20. Micro SD Memory Card Slot

21. Speaker

22. AC input jack

23. Battery compartment

www.PyleUSA.com2 www.PyleUSA.com 3

PRODUCT DESCRIPTION

1. Built-in Wireless BT MP3 player.

2. Built-in one channel wireless microphone and one 6.35mm MIC input to connect

wired dynamic MIC. Two persons can speak or sing at the same time.

3. Separate wired/wireless MIC and MP3 volume controls.

4. One 3.5mm REC out can be connected to a recording device or to the input jack of

a power amplier to further amplify and enlarge the audio power.

5. Bass, Treble and Echo controls. Suitable for karaoke.

6. Powered externally with AC, 12V DC or internally with built-in 12V/1.3A

rechargeable battery. Suitable for both indoor and outdoor use.

7. Ideal for many applications, including use in classrooms, conference/meeting

rooms, churches, health clubs and small auditoriums.

CAUTION

1. This unit is with speaker inside which can cause magnetic eld.

Keep this unit at least 60cm away from computer or TV.

2. This unit is with built-in rechargeable battery. Please recharge the battery every 2

months if you are not going to use the unit for a long period of time or the battery

may be damaged.

3. If the battery is damaged please replace with same specications battery.

Dispose the damaged battery environment friendly.

4. Free from high temperature. Don't expose the device to the hot equipment.

5. Don't place the device in the environment of humidity and dirts.

6. Place the device in the ventilated environment.

7. Don't pull the power cord while you pull out the plug.

Hold the plug tightly to pull it out.

8. Pull out the AC power if you will not use the device for a long time.

9. Your operation must be subjected to the specied voltage marked near the AC in

jack and complied with this guide.