Brochure
www.PyleUSA.com www.PyleUSA.com
MICROPHONE TRANSMITTER FEATURES
1. Grille: Protects the cartridge and helps to reduce the breath sounds and
wind noise.
2. Battery Cover: Open to install the battery.
3. Low Battery Indicator: Red light glows when its lack of power and should
renew the battery.
4. Power and Audio Mute Switch.
TRANSMITTER BATTERY INSTALLATION
1. Handheld Microphone Battery Installation:
Push open the battery cover. Insert the supplied batteries into battery jar in
polarity and push back the battery cover.
3 4
SYSTEM CONNECTION
1. Receiver Power Connection: Connect the DC connector of supplied AC/DC
adapter into the DC power input of receiver. Plug the AC input connector
into an AC 120/60Hz or AC 220V/50Hz outlet. (Shown as below)
2. Antenna: Keep the position of antenna at a 45 angle from vertical.
3. Audio Connection: Connect the corresponding output of receiver by the
supplied 1/4" phone jack audio cable or your XLR cable to the input of power
amplier, mixer.