Car Video System Instruction Manual

Use ▲/▼/◄/► cursor button to select
the item that you want to program
1). The item you selected will become
highlight
2). Input the track number that you want
to program by numeric buttons (0-9) on
the remote control
3). Press ▲/▼/◄/► cursor buttons to
move to "PLAY" operation button and
then press button (31) to program
playback
It is because that the DVD player and
the discs all have the “REGION CODE”. If
the region number described on the DVD
disc does not correspond to the region
number of this DVD player, the unit
cannot play the disc.
It is because that the current disc has
“Parental Control” level, and the player's
parental level is set below the level of the
disc, you should enter the correct
password to play the disc normally.
For how to set the “Parental Control”
level, please refer to “Parental Control”
on page 18.
When you insert a data disc including
audio (MP3), movie (MPEG4), picture
(JPG) files into the disc slot, the following
.
.
.
.
ENTER
When inserting a DVD disc, why it
can't be played, just showing “region
error”?
- When inserting a DVD disc, there is
a window shown on the screen that
requires entering 4 characters
password, why?
NOTE:
Frequently Asked Questions
-
13
media play window will be shown on the
screen:
Explain as follows:
1. Press ◄/► button to move between
work area A, B and C.
2. Press ▲/▼ button to select the desired
folder or file of this work area.
3. Press button (31) to confirm
the selected item.
4. In viewing picture or playback movie
mode, if you want to return to the
previous menu, press button.
Work area A:
Work area B:
Work area C:
(1):
(2):
(3):
Work area D:
folders list
files list
playback audio mode (default)
viewing picture mode
playback movie mode
file information display
ENTER
< (STOP)
Data Disc Play Operation