PYM-6 6-Channel Microphone Mixer Professional Owner’s Manual www.pyleaudio.
Your PYLE PRO series 6-Channel Microphone Mixer has been created to provide the home stereo audiophile with a sophisticated control center for use with tape recording and audio visual systems and powerful enough to mix up to six audio input sources. You can easily mix either six microphones, or five microphones and one auxiliary audio input source (such as a tuner, CD player, cassette player, or VCR). The PYM-6 is a fine choice as a primary or add-on mixer in any sound system.
Please read this manual throughly before you attempt to set up and use this PYM-6. It contains a rang of installation suggestions as well as instructions to ensure safe usage. Installed properly, you can expect years of trouble-free service from this product. REAR PANEL MICROPHONE OUTPUTS Let you connect the lowlevel outputs of all the mixed source to an audio device's microphone input jack. AUX HIGH LEVEL OUTPUTS Let you connect the high level outputs (0.
INSTALLATION GUIDELINES Be sure you make all the connections before you plug in the AC power cord or turn on the PYM-6. Use low-capacitance shield cables when connecting the microphones and auxiliary sound sources to the PYM-6's input and output terminals. This helps prevent hum and other noise. B.Connect up to 6 high-impedance microphones to the unbalanced HI IMP (1/4" PHONE) input jacks.
d d 4.CONNECTING AC OUTLET Cassette Deck There is one supplied unswitched AC OUTLET (MAX 300W) which allow the electrical hook up of other unit. MIXING THE INPUTS Set the MIC 1, MIC 2, MIC 3, MIC 4, MIC 5, and MIC 6/AUX mixing controls to approximately halfway between MIN and MAX, then adjust MASTER unitl you get an average rading of 0 on the LED meter. Mixer Connecting the AUX OUTPUT Both the AUX OUT 1/4" phone and AUX OUT RCA jacks are unbalanced, high-impedance, high level outputs.
USING THE FEEDBACK FILTER After you adjust the mixing controls, test the microphones. If you hear a loud squeal or other noise, turn FEEDBACK FILTER clockwise until you eliminate or reduce the feedback. The FEEDBACK FILTER control decrease feedback by up to 12dB, If you cannot eliminate the feedback with the FEEDBACK FILTER control, try connecting a frequency equalizer to help decrease feedback even more.
PYLE PRO PYM-6 Owner’s Manual - 5 PYLE PRO Audio, Inc.
Serial # (if available) Sound Contractor/Installer Other Mail Order PYLE PRO ELECTRONICS warranty registration card Please complete warranty card, detach and return Thank you for purchasing this PYLE product. To activate your warranty, please mail this card within 10 days. Name Address City, State ZIP Model No.
