Specifications

Professional
Audio
Section 4
4
117
Order Toll Free
1-800-543-4330,
FAX
1-800-765-6960
117
Order Toll Free
1-800-543-4330
Fax
1-800-765-6960
Microphones
Large Diaphragm Studio
Condenser Microphone
The Audio-Technica AT-3035
Condenser microphone
provides large diaphragm
studio quality, at an astounding
price. The low self–noise is
perfectly suited for today’s
most sophisticated digital
recording equipment. Benefits
of the large 26mm diaphragm include: •Extended
low frequency response •Exceptional detail •High
maximum SPL •Wide dynamic range •Optimized
output level Features: •“Side address” cardioid
pick-up pattern •Included custom shock mount and
carry pouch •Lo–cut switch at 80Hz, 12dB/octave
•Switchable 10dB pad Specifications: •Frequency
response: 20Hz~20KHz •Sensitivity: -32dB
•Impedance: 250ohm •Max input level: 148dB
•S/N ratio 82dB @ 1KHz •Dynamic range: 136dB
@ 1KHz •Phantom power requirements: 11~52V,
3mA typical •Connector: Integral three–pin XLR
male •Note: Cord not included
Order # (1–3) (4–up)
35-1300 $199.00 $179.00
TwinMic™ Multi-Purpose
Wireless Microphone System
Provides convenience, freedom of movement and
performance for camcorders, karaoke, mobile
DJs, schools, theaters and many other
applications. System includes: •PRO88
wireless receiver •PRO88 wireless transmitter
•ATR20 hand held
microphone •ATR35
clip-on microphone.
Choose the microphone that best suits your
application: •ATR20 is great for general
presentations including lectures and interviews
•ATR35 offers hands free versatility for more
dynamic presentations (includes windscreen
and clothing clip). Either connects to the PRO88
transmitter, which may be easily carried in a pocket
or worn on a belt. The PRO88 receiver is battery
operated, allowing easy use with camcorders,
portable and stationary PA equipment.
Specifications:
ATR20: •Element: Moving coil dynamic
•Polar pattern: Cardioid •Frequency response:
50Hz~12KHz •Sensitivity: -59dBm •Impedance:
500ohm •Cable length: 5'
ATR35: •Element: Electret condenser •Polar
pattern: Omnidirectional •Frequency response:
50Hz~18KHz •Sensitivity:-54dBM •Impedance:
1Kohm •Cable length: 4'
PRO88 Transmitter: •Operating frequency:
169.505MHz/170.305MHz switchable •Modulation:
FM •Power requirement: 9V @ 50mA, 9V battery
(#291-060), not included •Battery life: 8 hours
nominal •Dimensions: 4.09" (H) x 2.44" (W) x
0.94" (D) •Includes belt clip
PRO88 Receiver: •Same as tranmitter •Includes
belt clip, camera shoe mount adaptor, monitor
earphone, audio output cable, hook and loop
fasteners, double sided foam tape, flexible antenna,
3.5mm to
1
⁄4" plug adaptor
Order # Mfr. # (ea.) (2-up)
35-985 ATR288W $200.99 $180.79
ProPoint
®
Boundary Microphone
Ideal for use on
conference tables or
desktops, this
very low-profile
microphone is
designed for
minimum visibility
and maximum
performance. The wide-range condenser element,
with low-mass diaphragm, offers a uniform polar
pattern for maximum rejection of unwanted sounds.
Rugged construction includes 25' cable, permanently
attached between microphone and a male XLR type
connector. Specifications: •S/N ratio: 66dB
•Dynamic range: 86dB •Polar pattern:
Unidirectional •Frequency response: 70Hz~16KHz
•Power requirement: 9~52VDC phantom power
•Weight: 67g •Impedance: 100Ω •Output connector:
Male XLR •Mfr. #PRO 44
Order # (1-3) (4-up)
35-1015 $98.79 $88.19
ProPoint
®
Boundary Microphone
Ideal for use on
conference tables
or desktops, this
very low-profile
microphone is
designed for
minimum visibility
and maximum
performance. The wide-range condenser element,
with low-mass diaphragm, offers a uniform polar
pattern for maximum rejection of unwanted sounds.
Rugged construction includes 25' cable, permanently
attached between microphone and a male XLR type
connector. Specifications: •S/N ratio: 65dB
•Dynamic range: 105dB •Polar pattern:
Unidirectional •Frequency response: 70Hz~14KHz
•Power requirement: 9~52VDC phantom power
•Weight: 35g •Impedance: 100Ω •Output connector:
Male XLR •Mfr. #PRO 42
Order # (1-3) (4-up)
35-1010 $91.39 $81.39
ProPoint Gooseneck
Podium Microphones
Ideal for podium, conference room,
court rooms and other areas where
fixed location microphones are
required. Plug-in XLR mount.
Microphone element is a fixed
charge back plate, permanently
polarized condenser type.
Specifications: •S/N ratio: 66dB
•Dynamic range: 106db •Polar
pattern: Unidirectional •Frequency
response: 70Hz~16KHz •Power
requirement: 9~52VDC phantom
power •Weight: 84g •Impedance:
100Ω •Output connector: Male
XLR •Length: 16" •XLR mount
•Mfr. #PRO49QL
Order # (1-3) (4-up)
35-1040 $109.00 $97.89
Lavalier Microphone
•This omnidirectional lavalier condenser
microphone is well
suited for video
use •This
“newscaster-style”
microphone is
practically
invisible •Comes
with a lapel clip,
20' cord with
3.5mm mini plug,
1
⁄4" adaptor and
foam moisture protector •Replacement battery
available LR44 (#291-345)
Order # (ea.)
35-420 $37.95
Four Channel
Phantom Power
Supplies for
Condenser
Microphones
These units
conveniently use
110VAC power and
convert it into phantom power. Provides 48VDC. Can
be used to power condenser microphones without
interfering with dynamic microphones on other
channels. Perfect for use with microphones #35-660
and the nearly studio quality #35-665.
Order # (1-3) (4-up)
35-770 $176.75 $170.69
Single Channel
Phantom Power Supply
For use with condenser microphones when
connected to audio equipment that does not provide
phantom power. May be placed anywhere in-line
after the microphone. •Input: XLR female •Output:
XLR male •Output voltage: 48VDC ±2V •Output
current: 14mA •Frequency response: 10Hz~25KHz
•Dimensions: 1.73" (H) x 5.12" (W) x 2.36" (D)
•Power is supplied via included AC adaptor
Order # Model # (1–3) (4–up)
35-772 AT8801 $69.95 $62.95
48V Phantom
Power Supply
Tightly regulated
power supply is highly
filtered to provide
clean, consistent
48V phantom
power to condenser
microphones. Steel
housing utilizes rugged
metal frame locking
XLR connectors, and is designed for rough stage use.
Non skid rubber feet reliably hold the unit in place.
Utilizes standard AC line cord, no space consuming
AC adaptors are required. Specifications: •Input
connection: Female XLR •Output connections
Male XLR •Power requirements: 110VAC, 60Hz
•Dimensions: 1.9" (H) x 3" (W) x 5.5" (D) •Black color
Order # (1–3) (4–up)
35-1825 $32.50 $29.95
C50 pg 117 7/21/05 11:45 AM Page 117